Best Air Ride Suspension For 2022 Grand Design Solitude 346FLS 5th Wheel Trailer
Published 10/31/2022 >
Question:
I installed the LC1565391 air bag suspension on my 2022 Grand Design Solitude 5th wheel camper. In all I have seen and read air pressure recommendation if 5# per 1000# of trailer weight and/or the pads on the air bags be about 5” apart and parallel. With this camper weighing 17,000# that would make the air pressure at 85#. When I inflate to that pressure the pads are not on the air bags are not parallel, they are grossly wide open. For the pads to be parallel I had to lower the pressure to about 45#. Is this normal? Am I missing something for the pressure to be so much less when the pads are parallel? Thank you
asked by: Bruce H
Expert Reply:
Going with an air ride suspension is a really smart idea, and the best upgrade for your 2022 Grand Design Solitude 346FLS 5th wheel trailer is the Lippert Center Point, which replaces your equalizers and gives you new ones with air bags in their place. The correct part number is the following:
- Lippert Center Point by Trailair Air-Ride Suspension Upgrade # LC1565391
The Center Point # LC1565391 is for tandem axles up to 8,000 lbs, which I verified your Grand Design does indeed have. When installed, this system will give you a much smoother ride than any other suspension upgrade because air bags do a better job of absorbing movement and vibration.
Product Page this Question was Asked From
Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
- Trailer Suspension Parts
- Equalizer Upgrade Kit
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Tandem Axle
- Lippert
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Shop: Lippert Center Point by Trailair Air-Ride Suspension Upgrade - Tandem Axle
- Search Results: maxxair vent cover
- Search Results: trailer suspension parts
- Search Results: 5th wheel pin box
- Search Results: 175 wheels
- Search Results: air springs vehicle suspension
- Search Results: air ride suspension
- Q&A: Which is Better Cushioned Pin Box the Curt Flex Air or Curt Air Ride
- Q&A: Lippert Center Point Trailer Air-Ride Suspension Upgrade Kit LC1565391
- Q&A: Recommended Shock Absorption for Keystone Montana 5th Wheel with Tandem Axles
- Q&A: Will Lippert Center Point Fit 2017 Jayco 2035 RKDS
- Q&A: Which Equalizer is Better? The Lippert Center Point Air Ride or the MORryde Rubber Equalizers.
- Q&A: Recommended Longest Extended Pin Box for a Lippert 1621 Bolt Pattern
- Q&A: MORryde X-Factor Crossmember for 2024 Grand Design Reflection 150 Series 295RL
- Shop: Replacement Air Bag Units for Lippert Center Point Suspension Upgrade System - Qty 2
- Shop: Suspension Enhancement
- Shop: Single Air Pressure Gauge for Bulldog Winch On-Board Air Tank - 200 psi
- Shop: Replacement Air Gauge Panel for Lippert Center Point Air Ride Suspension System
- Shop: Replacement Signal Booster for TireMinder A1AS, i10, and Smart TPMS
- Shop: Aluminum Trinity Series Trailer Wheel - 17-1/2" x 6-3/4" - 8 on 6-1/2 - Black Fork
- Shop: Curt Air Ride 5th Wheel Pin Box - Lippert 1621 & 1621HD - 21,000 lbs
- Video: MORryde X-Factor Crossmember Set Up - 2025 Grand Design Reflection Fifth Wheel
- Video: Review of EMCO Trailer Leaf Springs - 7 Leaf Double Eye Spring 8000 lbs Trailer Axle - EM28AJ
- Video: An In-Depth Look at the MORryde X-Factor Crossmember for Standard Frame Hangers
- Search Results: 7 leaf trailer leaf springs
- Shop: RV Covers
- Video: Review of etrailer 7 Leaf Double Eye Spring - e89FV



Bruce H.
10/31/2022
I installed the LC1565391 air bag suspension on my 2022 Grand Design Solitude 5th wheel camper. In all I have seen and read air pressure recommendation if 5# per 1000# of trailer weight and/or the pads on the air bags be about 5” apart and parallel. With this camper weighing 17,000# that would make the air pressure at 85#. When I inflate to that pressure the pads are not on the air bags are not parallel, they are grossly wide open. For the pads to be parallel I had to lower the pressure to about 45#. Is this normal? Am I missing something for the pressure to be so much less when the pads are parallel? Thank you