Can Motor Be Replaced for Hydrastar Electric Over Hydraulic Actuator
Updated 10/06/2022 | Published 10/05/2022
Products Featured in This Question
Question:
can u get the moter for a hydrastar brake actuater
asked by: Andre
Expert Reply:
If the motor on your Hydrastar Electric Over Hydraulic Actuator went out then you'll need to replace the entire actuator as the motor is not a replaceable part according to my contact at Hydrastar. You'll just want to choose the actuator with matching specs to what you currently have:
Standard:
1,000 psi - # HBA-10
1,200 psi - # HBA-12
1,600 psi - # HBA16
Vented:
1,000 psi - # HS381-8065
1,200 psi - # HS381-8066
1,600 psi - # HS381-8067
Attached are a few review videos for you to check out.
Product Page this Question was Asked From
Hydrastar Electric Over Hydraulic Actuator for Drum Brakes - 1,000 psi
- Brake Actuator
- Electric-Hydraulic Brake Actuator
- Boat Trailer
- Travel Trailer
- Drum Brakes
- Hydrastar
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Convert a Trailer with Surge Brakes to Electric Over Hydraulic Brakes
- Q&A: Recommended Conversion Kit for Disc Brakes On 7,000 Lb Dexter Axles
- Q&A: Solution for Needing Replacement Caliper for Kodiak 204 Caliper
- Q&A: Kit to Convert 7k Axles of 2024 Brinkley Z3100 to Electric Over Hydraulic Disc
- Q&A: Troubleshooting EOH Brakes With Hydrastar Actuator Not Working With 2024 Ford F-450
- Q&A: Is the HydraStar # HBA-CAM Adapter Compatible with a HydraStar with Serial Number 310837
- Q&A: Which Trailer Electric Over Hydraulic Actuator is the Best
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: Adding Electric Over Hydraulic Disc Brakes
- Article: Gooseneck to 5th Wheel Adapters
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Bleed Your Trailer Surge Brakes