What Are The Dimensions Of The Single Momentary Reversing Switch?

Updated 10/03/2022 | Published 10/01/2022

Question:

Hi, do you by chance have a drawing or specs that provide the spacing/ dimensions of the spade connectors on this switch? I recently bought a replacement not from eTrailer that fit the existing cutout but my RV has a single four-wire socket that the switch plugs into, but the new switch terminals do not quite fit the plug.

asked by: Dana

Helpful Expert Reply:

We do not have a technical drawing, however I did head out to our warehouse and measure the:

-Single Momentary Reversing Switch # 37213865 for you.

The dimensions are as follows:

-The overall width is 3/4",

-The overall length is 1-7/16",

-The distance from center to center for the top pins is 7/16",

-The distance from center to center for the middle pins is 5/8",

-The distance from center to center from the top pins to the middle pins is 1/2",

&

-The pins have an overall height of 7/16".

Attached is a diagram for you to check out that illustrates these measurements.