Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
Single reversing momentary-on/off/momentary-on switch assembly is water resistant. DPDT, 20 amps at 125V AC, 10 amps at 250V AC, 12 amps at 125V AC 3/4 hp, 10 amps at 277V AC 3/4 hp, 30 amps at 12V DC.
Features:
California residents: click here
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
Michael: Hi there, I'm Michael with etrailer.com. Today we're going to take a quick look at the single momentary reversing switch. This switch is capable of handling two loads. It's going to allow you to press on either side of the rocker switch, and it will immediately return back to the off position, as you can see. So if we want the power to continue to flow through, we're going to have to hold down, and that's going to allow it to make sure that no power is flowing through when we don't want it to. So pretty simple design, but going to be effective for you.It is going to be water resistant, and as far as our power draw ratings go, it is capable of 20 amps at 120 volts alternating current, 10 amps at 250 volts of alternating current, 12 amps at 125 volts of three quarter horsepower, 10 amps at 277 volts alternating current and three quarter horsepower, and 30 amps at 12 volts DC power.
This is manufactured to meet all of the standards that you see on the screen there. So it is UL, CSA, ROHS, and IP66 approved, so you can trust it is going to be safe. Obviously when you're dealing with electricity, you want to make sure that you're getting quality components, and this is going to be a quality component for you.As far as our dimensions go, it is right about one inch in total width with our mounting plate there. The switch itself is just shy of three quarters of an inch in width. Switch is right about one and one eighth in total height there, and then with our whole plate we're looking at just over a one and three quarters of an inch.
Now to get this mounted, you are going to need a cutout that is going to be right about one and a half inches by slightly over three quarters of an inch, so keep that in mind, make sure that that's going to work for you.Obviously this is a black color, so should blend in well with most of your applications with that black feature to it. It is made here in the USA, so you can trust it's made to the high quality standards that we've come to know and trust for products made here in the US. Really that's all there is to our rocking switch, so if you're in the market for a switch that allows you to handle two loads like that, I think this is going to be a great option for you. So that's going to complete our look for today. Again, I'm Michael with etrailer.com, thanks for watching..
Average Customer Rating: 4.8 out of 5 stars (32 Customer Reviews)
Single reversing momentary-on/off/momentary-on switch assembly is water resistant. DPDT, 20 amps at 125V AC, 10 amps at 250V AC, 12 amps at 125V AC 3/4 hp, 10 amps at 277V AC 3/4 hp, 30 amps at 12V DC.I have a 2019 Rockwood fifth wheel, the RV tech said he couldn’t find the switch. After talking to Forest River directly, I was able to speak to a forestriver tech who knew my RV. He was able to locate the switch that was needed , and stated that it was on the etrailer website.
Used for our 2020 Roo 235s awning switch. Quick replacement with exact fit. Bought two for a spare as it will also work for the slideout.
Shipped fast and good price.
Replacement switch for up-down on my LCI hitch jack. Perfect fit, instructions good, worked well, delivery was only 5 days using economy rate, shipping and notifications were prompt.
Did the job! It’s a switch, so I wouldn’t give any switch a 5 star rating. Thank you for the part.
It's exactly what you said it was and would do.
I can't post a photo because the face was not completely square like the last switch so I had to cut it a bit to make it fit.
The switch fit the plate perfectly and now our awning works like new again !!TYVM
Terry & Patricia Kelsey
Terry
7/21/2023
It still works PERFECT !!
The part worked perfect
Works well to control my linear actuated tractor snowblower chute deflector
James
2/18/2023
Its had very little use but seems rugged and I expect it will last
Great fit, plugged in perfectly. I ordered the wrong one at first, but a return was no problem.
I replaced the original switch with this switch. It did solve the problem I was having where it would only work one way. This switch fixed it. One thing I suggest is to mark it with up and down arrows so the trailer tongue Jack is directed into motion the direction of the arrows. Easier for beginners.
Easy to install and works perfect for the awning on my camper.
Switch works as it should. Thanks for all your assistance.
Installing tomorrow
The products are exact duplicates of my OEM switches. This makes installing and using as easy as it can be.
Great service, products, and prices. Easy return policy for items that don't fit. I highly recommend this site.
I bought this to replace the switch for the slide on my RV. It was an easy install, a direct replacement. Thanks etrailer for another great experience.
Excellent product,USA MADE!
Much stronger and better made than the cheap China part that I am replacing.
Corners are rounded and mine are square, but it was easy to install, and closely matched the original. My up-down is working again! thanks!
AAAA+++++
thank you
Nice switch! Works as designed
Perfect fit!
Do you have a question about this Accessories and Part?
Info for this part was:
At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.
Larry
7/22/2024
Great the switch was perfect , it still preforming the job of moving my dinning room slide .??