Replacement 3/8 Inlet/Outlet Regulator With Hose Solution

Question

Question:

What are the inlet AND exit size of the regulator? Looking for one that has a 3/8inch NPT on inlet AND exit.

asked by: Steve

0

Expert Reply:

I took a look at the Replacement Gas Inlet Connector and LP Regulator Inlet Assembly for Furrion RV Wall Oven # FR47PR, and this regulator uses a 1/2" NPT in/out connection.

For a 3/8" in/out regulator, the only thing that we have, is the:

-BBQ Adapter Hose # 37207-31305.

This adapter hose is 5' long, and has a type 1 (3/8" inlet) connector on one end, and a 3/8" female flare outlet.

With the size you need being pretty uncommon, you are probably going to have a hard time finding what you need. If you are able to let me know what model of Furrion stove you have, I'd be more than happy to see if we have a direct replacement regulator for you.

expert reply by: Bryce D

0

Answer 1

Thank you for reaching out and for the photos! We try to carry over the wiring brackets and for a long time they didn't change which is why we carried it over. With this new information we will definitely be updating our website. For your…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

The trailer brakes work on a separate circuit than the lights. You have a couple of options to control the electric brakes on the trailer. One option is to use an air over electric brake control, #HA100400C. This unit connects to the air brakes on…

view full answer...

Answer 6

If your vehicle has a factory brake controller plug, you can simply use the Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers – Ford, Item #3034-P, which will connect to the vehicle plug and the brake controller. On the new E-450…

view full answer...

Answer 7

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 8

Hey Nelson, so you would need two separate systems since a supplemental braking system can only be used with a towed vehicle and a trailer brake controller can only control trailer brakes. Main difference is a supplemental braking system is designed…

view full answer...

Answer 9

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 10

Hey David, we can help with a brake controller install in your 2006 Jeep Wrangler that has a factory 7-way but your Jeep does not have brake controller pre-wiring so you would need to hardwire in the controller with a kit like the part #5506 and a…

view full answer...

Answer 11

Hello Dan, We can most definitely get you set up to use your Redarc Tow-Pro Liberty brake controller in your 2022 Toyota Highlander. Since you were looking at the #ETBC7, I’m assuming your Highlander does not have the factory tow package. To equip…

view full answer...

Answer 12

To tow your trailer that uses an RV style 7-way blade style connector with your semi that has a 7-pin connector, you need to construct an adapter that will also combine the brake signal into the right and left directional signal pins. This can be…

view full answer...

Replacement 3/8 Inlet/Outlet Regulator With Hose Solution

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching