Replacement Strut for a Lift-O-Matic 654150 0550n 331/12 c15 Strut

Question

Question:

Looking for an Rv awning strut part# 654150 0550n 331/12 c15

asked by: Brian

1

Helpful Expert Reply:

While we do not carry a direct replacement for your 654150 0550n 331/12 c15 strut, we do have a strut that will work as a replacement.

- Solera Gas Strut # LC280343

The Solera Gas Strut # LC280343 has the same dimensions as your current strut of 26.46" when extended, 15.04" when retracted. It exerts 124 lbs. of force.

expert reply by: Scott S

1

Lift-O-Matic 654150 0550n strut
(click to enlarge)

Answer 1

Hey Andrew! Thank you for providing that part number. The Replacement Gas Strut for Short and Flat Solera RV Awnings #LC280343 is the correct replacement for your 654150 0550N 195/15 A15. The part number is a little different but it has the same…

view full answer...

Answer 2

Here is the information I was able to find on your Stabilus 654150 0550N 275/12 A 15 gas strut which you can verify with yours. The Stabilus strut measures 26.496" when extended and 14.921 when retracted at the center of the mounting holes with…

view full answer...

Answer 3

I do have an option for you but the Replacement Bug Screen part #FVK2034-80 is not correct for your Ventline Northern Breeze Vent nor is the correct replacement available as it has been discontinued by the manufacturer. The only option we can offer…

view full answer...

Answer 4

Hey Tom, the Northern Breeze trailer vent has been discontinued which means the replacement screen you are in need of is not available. While I know it is not exactly what you wanted to hear, the best option available is to replace your Northern…

view full answer...

Answer 5

Yes, the Replacement Short Arm Assembly for RV Awnings part #LC404523 is correct for a Solera V000436372 Awning.

view full answer...

Answer 6

To remove the 3" cap on your Valterra Sewer Drain like #T30A I recommend using the FloTool GRIPTECH 3-Position Adjustable Pliers #FT10627GT which can be adjusted between 2-3/4" and 4" to give you extra leverage in removing the cap. For…

view full answer...

Answer 7

We do have the linkage you need available with the Replacement Gear Box and A Linkage for Kwikee Electric RV Steps #LC379160. The linkage used with the #LC379160 is the correct linkage, but we do not have just the linkage available. We only have it…

view full answer...

Answer 8

The Lippert Motor Home Entry Screen Door Bubble Slider Panel #LC234101 does not have a right hand or left hand version. The dimensions of the door slider panel is 12 inches by 12 inches. The screen door slides open so that RVers can open there entry…

view full answer...

Answer 9

We have replacement support arms from Solera that measure 69 inches such as the Solera 69" Standard Flat Awning Support Arm #LC281154 (Black) and Solera 69" Standard Flat Awning Support Arm #LC281152 (White) but no replacement arms that are…

view full answer...

Answer 10

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 11

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 12

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Replacement Strut for a Lift-O-Matic 654150 0550n 331/12 c15 Strut

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching