Correct Spacing for Triple-Axle Trailer Hanger Kit for 2 Slipper Springs with 10-1/8 Equalizers

Updated 08/15/2022 | Published 08/12/2022

Products Featured in This Question

Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers

(29)

$348.92

5-Leaf Slipper Spring w/ Hook End for 7,000-lb Trailer Axles - 26-5/8" Long

(246)

$90.47

Question:

Is there a drawing that shows the measurement for a.triple axle trailor . We.bought the setup ap 302 and h302 to replace what was.worn. everything underneath was rusted and falling off so we dont really know how to setup the equalizers. Can u help

asked by: David N

Expert Reply:

We sure can!

The spacing you're looking for between the hangers for the Triple-Axle Trailer Hanger Kit for 2" Slipper Springs # AP302-H302 is 28-1/2" for the first to second hangers, 33" from the second to third hangers, and then 28-1/2" from the third to the fourth hangers. This would allow you to use a 2" slipper spring like the 5-Leaf for 7K Axle # e74SR.

When it comes to exact placement of the hangers on the trailer frame that's something you'll have to play with to get the correct placement. The ideal locations will give your trailer a tongue weight that's 10-15% of the weight of the trailer.

expert reply by: Jon G