Trailer Roof Vent Cover That Fits A Dometic Fan-Tastic Fan Model 1450 Roof Vent

Question

Question:

I have a Dometic Fan-Tastic vent fan, Model DV1450, and I want buy a roof cover for it. My vent has 4 plastic brackets with a peg that sticks up located on each corner on the roof approximately 17 apart. It looks like they will take the place of the metal bracket that comes with the cover. My question is will the ultra breeze cover fit my vent model.

asked by: Larry A

0

Expert Reply:

Yes absolutely! Those 4 plastic tabs are actually integrated mounting points specifically made for mounting the:

-Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover # DMC38FR.

So with that being said, this cover will work great for you!

expert reply by: Bryce D

0

Answer 1

The Dometic 1450 has a bit of a unique vent lid so you'd either have to reach out to Dometic for a replacement or go with a universal fit like the MaxxAir UniMaxx Universal Replacement Lid #MA00-335001 (Black #MA00-335002) and rig together your…

view full answer...

Answer 2

Hello Emily, thanks for reaching out. Sounds like you are on the right track here. The Replacement Dome Kit for Dometic FanTastic RV Roof Vents #DMC96RR is indeed correct for your Dometic fan model DV1450.

view full answer...

Answer 3

Hey Mark. The Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover item #DMC38FR does limit the cover on your Fantastic Fan model 3350 from fully opening. The lift motor will stop once it feels resistance and will hold that position without any…

view full answer...

Answer 4

Hi Allison; assuming you want the black cover the Dometic FanTastic Ultra Breeze Trailer Roof Vent Cover #DMC38FR you were looking at is what you need. If you would prefer white then you need the #FVU1500WH instead. What kind of RV do you have?

view full answer...

Answer 5

Hello Bob, good question. We actually get asked this every now and then. It will be fine to use a vent cover that does not allow the lid to open all the way. The lift motor will stop once it feels resistance and will hold that position without any…

view full answer...

Answer 6

The Replacement Dome for Fan-Tastic Vent RV Roof Vents - Tinted #FVK1020-19 is the correct replacement dome lid for all Fan-Tastic brand vents. That manufacturer utilized the same cover for all their products which is really nice to ensure you get…

view full answer...

Answer 7

The Dometic Ultra Breeze Trailer Roof Vent Cover part #DMC38FR installs using brackets which secure to the vent lid flange. The brackets are screwed into the roof but the cover is attached to the bracket using pins and is easily removeable. I have…

view full answer...

Answer 8

We do not have a white, translucent lid cover in our available inventory but we do have a lid cover for your Fan-Tastic fan that is a smoke-colored "black", Item #FVK1020-19. Another item you might be looking for or need is the Fan-Tastic…

view full answer...

Answer 9

The Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover #DMC38FR has the following hole center dimensions. The closest holes are separated by 1-3/4" on center. From the forward front hole to the rear front hole are 9-3/8" on center. And…

view full answer...

Answer 10

The difference between the Roadmaster Direct-Connect Base Plate Kit #RM-521453-5 and Roadmaster Crossbar-Style Base Plate Kit #RM-521453-4 is how tow bars attach. As the name suggests, you will connect your tow bar straight to the direct-connect base…

view full answer...

Answer 11

The correct replacement motor for your LCI motor 366043 on your Kwikee steps is Lippert Components Kwikee Motor and Screws for New IMGL Step Item #LC379147.

view full answer...

Answer 12

I checked with Lippert and the part number you have of 1510000140 corresponds with the Revolution Kwikee step and the replacement control module you need then is the part #LC363985.

view full answer...

Trailer Roof Vent Cover That Fits A Dometic Fan-Tastic Fan Model 1450 Roof Vent

Product Page this Question was Asked From

Continue Researching