TorkLift Talon Camper Tie-Downs For a 2021 Chevrolet Silverado 2500HD

Question

Question:

Will the TLC2220A and TLC3215A fit 2021 Chevy HD?

asked by: Roy H

0

Expert Reply:

For your 2021 Chevrolet Silverado 2500HD you will need one of the following kits depending on your truck bed length.

6-3/4 Foot Bed
TorkLift Talon Custom Frame-Mounted Camper Tie-Downs Front # TL43QR and Rear # TL44XR

8 Foot Bed
TorkLift Talon Custom Frame-Mounted Camper Tie-Downs Front # TL73QR and Rear # TL44XR

The Tie-Downs # TLC2220A fits certain 2011-2019 Chevy/GMC 2500HD/3500HD trucks, while the Tie-Downs # TLC3215A fits certain 2015-2019 Chevy/GMC 2500HD/3500HD trucks.

expert reply by: Bud M

0

Answer 1

According to CR Brophy, the camper tie down brackets you'd looked at, part #HSWB are specifically designed to fit the bed of a 2019 Ford F-250 and 350. There does indeed need to be 2 inches of available space under the lip of the truck bed side…

view full answer...

Answer 2

Currently there is not an option for the 2021 GMC Sierra 2500 HD available from Happijac. My recommendation is the TorkLift Talon Custom Frame-Mounted Camper Tie-Downs, #TL44XR for the rear, will work with either the 8' bed or the 6-3/4'. Use…

view full answer...

Answer 3

If you have running boards or steps that extend past the cab and under the bed then they will interfere with the front tie down's fitment. If you don't have running boards or steps under the bed then you can use the TorkLift Talon Custom…

view full answer...

Answer 4

The correct TorkLift tie-downs for your 2020 Chevy Silverado 2500 are as follows: 6-3/4' Bed - Steel - Front #TLC2225 and Back #TLC3221 - Aluminum and SSS - Front #TL43QR and Back #TL44XR 8' Bed - Steel - Front #TL44FR and Back #TLC3221 -…

view full answer...

Answer 5

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 6

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 7

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 8

We have run into this quite a few times in the past, and the best option will be replacing the Lance 7-pin connector with a standard 7-way blade connector like the #PK12706. This will give you a standard 7-way connector to plug into the factory 7-way…

view full answer...

Answer 9

Hello Mike, Sounds like you are getting things set up the right way and not going over your payload, I respect that. It looks like the weights are the same whether you have a 6 3/4' or 8' bed. If you happen to have an aftermarket hitch,…

view full answer...

Answer 10

Hey Uwe, I would definitely go with the Hellwig Load Pro 35 part #HE93XR over the Timbren. The Timbrens are notoriously harsh and bouncy and since that's not what you want I would definitely avoid them at all costs. Hellwig will give you the…

view full answer...

Answer 11

Hello Bart, thanks for reaching out. I can definitely point you in the right direction, but I will need a bit more information on your truck before I can recommend the correct tie downs. Can you please answer the following questions for me? 1. What…

view full answer...

Answer 12

Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…

view full answer...

TorkLift Talon Camper Tie-Downs For a 2021 Chevrolet Silverado 2500HD

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching