Replacement Seals for an Extang Solid Fold 2.0 Cover on a 2014 Toyota Tundra

Question

Question:

can it be fixed or replaced its off my 2014 tundra

asked by: John

0

Expert Reply:

Typically the seals on the Extang covers are replaceable. I have listed the seals we have available for the Extang Solid Fold 2.0 covers we have available below.

- Replacement Side Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32560368

- Replacement Cab Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32000120

- Replacement Tailgate Seal for Extang Solid Fold 2.0 Tonneau Covers # EX32563200

These replacement seals will work with the Extang Solid Fold 2.0 covers. If you have a different Extang solid cover on your 2014 Toyota Tundra, please let me know what cover you have and I can help you find the correct replacement seals.

expert reply by: Scott S

0

Steve S.

9/5/2024

Scott, I have an Extang Solid Fold 56000 series on my 2014 Tundra 1794. I need to replace the tail rail seal, however all I see are Extang Solid Fold 2.0 parts listed on the web. Will the 2.0 tail rail seal seal fit my 56000 series cover? Thanks. Steve

Jameson C.

9/5/2024

@SteveS We only have confirmed fit replacement parts for the 2.0 at this time.

Steve S.

9/5/2024

@JamesonC Thanks for the response. I was hoping that 2.0 and original might be interchangeable. I’ll reach out to Extang too.

Jameson C.

9/5/2024

@SteveS Hopefully they have a solution!

Answer 1

Yes you can use the Replacement Side Seal for Extang Solid Fold 2.0 Tonneau Covers #EX32560368 as a replacement for your Extang Solid Fold 2.0 that's missing a side seal. This seal measures 68-1/2" long however it can also be trimmed if need…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 5

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 8

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 9

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 10

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 11

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Answer 12

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Replacement Seals for an Extang Solid Fold 2.0 Cover on a 2014 Toyota Tundra

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching