Thickness of Metal of Single Axle Hanger Kit
Updated 06/14/2022 | Published 06/12/2022
Question:
How thick is the steel that was used to make these hangers?
asked by: Jeff
0
Expert Reply:
The metal is 3/16" thick on the hangers in the Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front # APS6SE.
expert reply by:
Kyle S
0
Product Page this Question was Asked From
Single-Axle Trailer Hanger Kit for 2" Slipper Springs - 3-3/4" Tall Front
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Single Axle
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Are Dexter and Kodiak Disc Brake Line Kits the Same in Terms of Quality
- Q&A: Choosing a U-bolt Kit for Trailer with 1-3/4 Inch Wide Leaf Springs
- Q&A: Recommended Equalizer w/ a 6-1/4" Center Bolt to Center Bolt Spacing
- Q&A: Recommended Replacement Coupler For An Atwood 2" Coupler
- Q&A: What Kwikee Electric RV Step Replaces Coach Steps 725-0043 on 2005 Monaco Monarch
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Recommended Trailer Axle for 6 Foot Wide Trailer
- Q&A: Dimensions of Hangers Included with Single-Axle Trailer Hanger Kit for 2" Slipper Springs APS6SE
- Article: RV Sway Control, Stabilization, and Suspension Enhancement
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: What Is A Leaf Spring? (Everything You Need to Know About Trailer Leaf Suspension)
- Article: How Long will the Axles Last on my Boat Trailer?