Tips On Where to Place an Axle on a Trailer
Published 10/07/2013
Question:
give me a dummies explantion. On a 6wide X 10long where is the center of the axle susposed to be. Give me a drqwing or a mesurement. Thanks
asked by: Del L
0
Expert Reply:
Well, that is going to depend on several factors. Roughly, very roughly, it would be 3/5 of the way back from the front. But there is more to it than that. There is a bunch of basic math involved. Like you wanted, I have included a picture that should help you determine where the axle should be placed on your trailer.
expert reply by:
Michael H
0
click to enlarge
Product Page this Question was Asked From
Front/Rear Hanger for Double-Eye Springs - 1-5/16" Tall - 9/16" Bolt Hole
- Trailer Suspension Parts
- Hangers
- Camper
- Car Hauler
- Utility Trailer
- Double Eye Springs
- 9/16 Inch Diameter
- 1-1/2 Inch Tall
- Single Axle
- Tandem Axle
- Triple Axle
- etrailer
more information >
Continue Researching
- Q&A: Does Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 Have Ceiling Garnish
- Q&A: Parts Needed to Convert Bulldog 12k Manual Jack to Electric
- Q&A: What is Recommended Clearance between Trailer Axle and Frame
- Q&A: New Hangers for my Trailer
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Can Dexter Heavy Duty Suspension Kit K71-449-00 Replace Shackles that are 2-5/8 inches
- Q&A: Replacement 10" Brake Assemblies and 2" Actuator for a Tandem Axle EZ Loader Boat Trailer
- Article: Gooseneck to 5th Wheel Adapters
- Q&A: How is the 30-20 Hanger Designed For Mounting On Its Side and Not Facing Down
- Article: Determining Trailer Tongue Weight
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Slipper Spring Trailer Suspension System Review
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Raise Your Travel Trailer Height