Determining The Correct Bearings And Seals For A 2007 EZ LOADER Boat Trailer
Updated 04/22/2022 | Published 04/15/2022
Question:
I have a 2007 EZ Loader boat trailer VIN 1L8AABMDX7A042432. What size bearings and seals do I need?
asked by: Michael A
Expert Reply:
I can help you find the correct bearings and seals for your 2007 EZ Loader boat trailer. It will require you to remove your bearings and seals. Your trailer's bearings and seals have part numbers on them. Once you remove the old bearings and seals, you can find those numbers. If you provide me with the bearing and seal part numbers, I can find the replacement part for you.
In the case you can not identify the part numbers, we do have an alternate solution. It would require you to take measurements of the bearings and seals with a digital caliper, part # PTW80157. I have included a diagram to show how these measurements are taken below.
(click to enlarge)
Product Page this Question was Asked From
4" Carbon Fiber Digital Caliper
- Hand Tools
- Measuring and Layout Tools
- Digital Calipers
- Carbon Fiber
- Performance Tool
more information >
Continue Researching
- Q&A: Replacement Hub/Rotor for UFP 41030
- Q&A: Kodiac Disc Brake Kit Compatibility with UFP DB-42 Axle
- Q&A: Does The Dexter DX26XR Replace My DB-42 Calipers?
- Q&A: Replacement Brake Setup for Trailer with DB-42 Disc Brakes
- Q&A: How Can I Identify an Axle Without a Sticker?
- Q&A: Dimensions of CES38WR Spindle
- Q&A: Greasable Shackle Bolt that is 3-1/2 inch Long and 9/16 inch Diameter
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Trailer Lighting Requirements
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Testing Trailer Brake Magnets for Proper Function
- Article: What Do I Need To Tow A Trailer?