How To Determine What A Good Ignition Source To Install A Firestone Extreme Duty System Is?

Updated 04/06/2022 | Published 04/05/2022

Products Featured in This Question

Digital Multimeter with 42" Long Test Leads - XL LCD Display

(5)

$40.45

Question:

where on a 2022 gmc 3500hd denali can i tap into an ignition source for power? i have the heavy duty 150psi compressor with tank and pressure switch. i would like a 30 amp location. my kit # is 2543, air compressor #24-3582-9287. thank you

asked by: Scott F

Expert Reply:

In order to determine the correct 12v, 30 amp, ignition activated power source for your Command I Xtreme Duty Compressor with Analog Gauge, Air Tank, and 25' Hose # F2543, you will need to physically test with a multimeter # PT29ZR, or refer to your owner's manual for which circuits come on with the ignition, and which ones are at 30 amps.

Unfortunately, we cannot tell you which circuits those might be, as these will vary from vehicle to vehicle.

I have attached a piece of the wiring schematic and a review video for you to check out as well.

expert reply by: Bryce D