Installation Instructions for the Valterra ABS Tank Fill Kit
Updated 03/15/2022 | Published 03/14/2022
Question:
Do you have a vidio on how to install the fill tube. What size hole needs to be drilled and so on.
asked by: Dave R
Expert Reply:
Sorry we do not have any installation videos on the Valterra ABS Tank Fill Kit - Straight Barbed Fill item # RK908. There should be some pre-drilled fittings on the tank that are not being used. The fill fittings get installed at the top panel where the top edge of the side panels of the tank body, or the top edge of the end cap. The drain fittings get installed at the bottom edge of the side panels or the end cap. And the vent fittings get installed at the top panel of the tank, or top edge of the side panels or end cap. Each end cap of the tank has three pre-molded 3/8" FPT drain or vent receptacles.
Product Page this Question was Asked From
Fill Kit for Valterra ABS Fresh Water Tanks - Straight Barbed Inlet
- Accessories and Parts
- RV Fresh Water Tank
- Tank Fill Kit
- Valterra
more information >
Continue Researching
- Q&A: Lift Kit Needed for #11 Torflex Axles with Top Mounting Holes
- Q&A: Location of Fill Ports on Valterra RV Water Tank
- Article: How Does an RV Water Pump Work?
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)
- Article: Frequently Asked Questions About Transmission Coolers
- Q&A: Can Optronics RV Tail Light be Grounded to Aluminum Siding on Trailer
- Q&A: How to Measure a Trailer Hub or Dust Cap to Find the Right Replacement Dust Cap
- Q&A: Replacement Steps for Lippert 171317
- Q&A: Replacement Parts for Lippert RV Steps 171317
- Article: What are the Common Types of Propane Fittings Used on RVs?
- Q&A: Can Valterra RV Water Tank be Installed on its Side
- Article: RV Roof Types: What Type of Roof Does My RV Have?
- Article: Snow Tire Chains Explained: How Tire Chains Work & When to Use Them
- Article: Double-Eye Trailer Suspension System Review