Which Air Lift Suspension Enhancement Kit for 2002 Ford F-250 with B and W Gooseneck

Question

Question:

2002 Ford F-250 diesel 4x4 6 3/4 bed. Which airlift kit to use with a Bandw hitch BWGNRK1108

asked by: Ron

0

Expert Reply:

For your 2002 Ford F-250 diesel that has the B and W Gooseneck hitch part # BWGNRK1108 the Air Lift kit you'd want is the part # AL88291 which fits your truck and was designed specifically to work with the B and W hitch.

expert reply by: Jameson C

0

Answer 1

According to Reese, their Universal 5th wheel hitch install kit, part #RP30035 is indeed a fit for your 2004 Ford F350. The #RP30035 includes the frame brackets, bed rails and all necessary mounting hardware. . Whether or not it would be compatible…

view full answer...

Answer 2

Firestone makes an air bag kit part #F2550 that fits your 2003 Ford F-250 and is compatible with the universal Reese fifth wheel rail kit part #RP30035 and hitch #RP30047 but the Air Lift kit you mentioned does not fit with an in-bed hitch. The…

view full answer...

Answer 3

For your 2003 Ford F-350 we have the Air Lift kit part #AL88291 as a confirmed fit that was designed to work specifically with B and W fifth wheel rail kit part #BWGNRK1108 which allows you to use what many consider to be the best fifth wheel hitch…

view full answer...

Answer 4

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 5

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 6

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 7

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 8

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Kim, thanks for reaching out. The Firestone Ride-Rite Air Bags with Easy Mount Compressor #F24XV do fit your 2020 Ram 2500 with rear coil springs, but the hang-up is the under-bed gooseneck hitch. On your truck, the air bag brackets and the…

view full answer...

Answer 11

Hi Kaleb, great question. I know combining air bags with a B and W Turnoverball hitch can be tricky, but there is a good option that works with your setup. With the B and W Turnoverball Hitch part #BWGNRK1108 on your 2002 Ford F250 4x4 long bed. One…

view full answer...

Which Air Lift Suspension Enhancement Kit for 2002 Ford F-250 with B and W Gooseneck

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching