Friction Hinges For Entry Door On 2013 Thor Palazzo Motorhome

Question

Question:

I would like to add friction hinges to my RV. It is made by Thor and is a 2013 Plazzo. Lippert told me it is a Dexter door and they can not help me. Can you?

asked by: Pat H

0

Expert Reply:

You can use the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf - Black # LC95VR to replace the hinges on your door.

They come in a quantity of 1 so you will need to make sure that you buy enough to support your door.

expert reply by: David B

0

Answer 1

Hey Joseph, welcome back! I have two 6 Leaf friction door hinges, however they're only 9-5/8" long. They are the Replacement Hinge for RV Entry Door - 6 Leaf - White item #LC22NJ or item #LC95VR in black. These have the controlled motion…

view full answer...

Answer 2

The Replacement Entry Door Hinge for RV #LC198295 that we offer is only 9-1/4" long x 2-1/8" wide, but you would still be able to use this hinge anyway. You'll need to drill out the rivets holding your current hinge in place then fill…

view full answer...

Answer 3

Hey Cliff, with the Replacement Controlled Motion Hinge #LC95VR to get the desired effect where the door doesn't swing open or closed all you have to do is replace is a single hinge and not all three.

view full answer...

Answer 4

Yes, the temperatures you mentioned are normal. If you were getting over 200 degrees that would be a bad sign. But typically if all of the hubs are the same temperature you're good and it's only really an issue if one of the hubs is hotter…

view full answer...

Answer 5

Since your Winnebago Solis 59P has a pop top, instead of using the Dodge ProMaster Van Adapter for Thule HideAway Awning #TH301650 with the Thule HideAway Awning for ProMaster or Sprinter #TH620001, I recommend using the: -Thule HideAway Awning…

view full answer...

Answer 6

If the door hinge on your 2005 Winnebago Vectra has a similar design then yes, the Replacement Controlled Motion Hinge for RV Entry Door - 6 Leaf #LC95VR will work as a replacement. This is a universal product that has an overall length of…

view full answer...

Answer 7

Thanks for your question Arnie. All of the base plate kits we carry for the 2026 Ford Maverick Hybrid require some modification to the lower active air shutter system. After comparing the installation instructions, the etrailer Invisible Base Plate…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 10

Hey Jon; I was actually just talking to Furrion about heat options for the Chill Cube yesterday (1/21/2025). At this time, the only way to have heat with this unit is through a furnace on a ducted setup. The Furrion Chill Cube RV AC w/ Air…

view full answer...

Friction Hinges For Entry Door On 2013 Thor Palazzo Motorhome

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching