Availability of Rhino Rack Roof Rack JB0308 for 2022 Ford F-250

Question

Question:

I emailed to see if I could order the rhino rack JB0308 rack for my 2022 f250. I received a response from Jameson C. which stated simply that Rhino rack doesn’t make a rack for my vehicle. According to the Rhino rack website, this is not true. I just wanted to know if you can get the JB0308 for me or not. Thank you

asked by: Jeff B

0

Expert Reply:

So I found online what Rhino Rack sells as their JB0308 and it's actually a combination of parts that we do sell as part # RRRLKHD, # RB1500B (quantity 2), and fit kit # DK498.

expert reply by: Jameson C

0

Answer 1

To add a roof rack to your 2023 Ford F-250 Crew Cab, I recommend the roof rack by Rhino-Rack and it includes the following parts: Rhino-Rack Vortex Aero Crossbars - Aluminum - Black - 59" Long - Qty 2 item #RRVA150B-2 Rhino-Rack 2500 Series Legs…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 4

Hi Adam, The Rhino Rack Vortex Roof Rack #RR65NP is a full roof rack kit and will be all you need to get a roof rack on your 2013 Toyota Prius C. It includes the crossbars, towers (some people call them feet), and the door jamb clamps. The only…

view full answer...

Answer 5

Hi Dennis; you aren't going to find information on the static load listed from the roof rack manufacturers. Our general guidelines for tents like the Y79XR are that the roof rack must have a minimum load capacity of 165 lbs which this rack does…

view full answer...

Answer 6

Hello Leslie, I looked up your previous orders and see that you ordered the #RRVA180B 71" Rhino Rack Vortex Crossbars back in 2023. I took a stroll out to the warehouse and was able to confirm that the mounting hardware #Y42XR for the Yakima…

view full answer...

Answer 7

Hey Mike, thanks for reaching out! The 16K Pullrite SuperGlide #PUL43RR is an excellent option for towing your Grand Design with your 2025 F-250, and if you lockout your Lippert Turning Point pin box you'll be able to use them together. You…

view full answer...

Answer 8

Hey Steve, The B&W Patriot #BWRVK3255 you have would require base rails or a gooseneck hitch and an adapter in order to mount to the bed of the F-250. If you want to go with base rails then I recommend the B&W Custom Installation Kit w/ Base…

view full answer...

Answer 9

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 10

Hello again Steve. According to Gen-Y, you want to go off the actual GVWR when selecting your pin box. Since your GVWR is 15,495 you will definitely want to go with the 2,500 lbs - 4,500 lbs pin weight capacity range. The Gen-Y Hitch Shock Absorbing…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Availability of Rhino Rack Roof Rack JB0308 for 2022 Ford F-250

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching