Availability of Trailer Hub Grease Cap that Fits 1.98 inch Diameter
Published 01/13/2022 >
Products Featured in This Question
Question:
I am looking for dexter bearing hub grease caps with the rubber inserts to grease the bearings. The OD of the grease caps I have 1.985. I would also like to get extra rubber inserts for the caps.
asked by: Carl B
1
Helpful Expert Reply:
For a trailer hub grease cap that fits a diameter of 1.985 inch you'd want the part # 21-41-1 and then for the rubber plug that fits the center of the cap is the part # RG04-010.
expert reply by:
Jameson C
1
Product Page this Question was Asked From
Replacement EZ Lube Drive-In Grease Cap - 1.986" OD - Qty 1
- Trailer Bearings Races Seals Caps
- Caps
- EZ Lube Grease Cap
- 1.98 Inch O.D.
- 1.99 Inch
- 2000 lbs Axle
- 2200 lbs Axle
- 2500 lbs Axle
- 3000 lbs Axle
- 3500 lbs Axle
- Dexter
more information >
Continue Researching
- Q&A: What's the Date Code on Kenda Tires
- Q&A: What Grease Is Preloaded in the etrailer Easy Grease Trailer Hub AKIHUB-545-2-G-EZ-2K?
- Q&A: Who Makes Dexter Trailer Axle Bearing?
- Article: Trailer Lighting Requirements
- Q&A: Grease Caps that Fit Lippert 3,500 lb Axle Hubs
- Article: How to Install E-Track in 3 Easy Steps
- Q&A: Will the Reese Adapter # RP30156 Work with Older Reese Hitch on 2017 Ford F-250 with 6-1/2 Foot Bed
- Q&A: Recommended 5th Wheel Rail Adapter for the Ford Factory Puck System
- Q&A: What is the Difference Between Grease Seal 58846 and Grease Seal 10-19?
- Article: Trailer Maintenance Schedule
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub

