Can Spring Seats of Trailer Axle Get Moved
Updated 01/03/2022 | Published 01/02/2022
Question:
can I get the spring seats loose? I need a 95 inch hub face to hub face with a 78 inch spring center to center. Thank you
asked by: Frank G
0
Expert Reply:
The spring seats on trailer axles like the # e52GR that you referenced are welded on so you'd have to cut them off and have them rewelded if you needed to move them.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 95" Long - 3,500 lbs
- Trailer Axles
- Leaf Spring Suspension
- Standard Grade
- Idler Hubs
- 3500 lbs
- 5 on 4-1/2 Inch
- 80 Inch Spring Center
- 95 Inch Hub Face
- No Drop or Lift
- etrailer
more information >
Continue Researching
- Q&A: Does It Matter If the Spring Center and Hub Face Is Different When Replacing A Trailer Axle
- Q&A: Are Trailer Spring Seats Needed for Square Axles with Leaf Springs?
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Q&A: Is Lid of Hopkins Breakaway Kit 20400 Replaceable
- Article: How to Determine Tire/Wheel Diameter
- Q&A: Availability of Mounting Brackets for Tandem Axle Teardrop Fenders w/ Backing Plates
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Q&A: Replacement 3,500 Lb Dexter Axle D4518710
- Q&A: How to Find Replacement Axle for Hurricane HUR 2178 Boat Trailer
- Q&A: Does Truck with 6-1/2 ft bed Have to Use Slider Hitch for Turning Clearance with Fifth Wheel Hitch
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: How to Accurately Measure Trailer Leaf Springs