Does SuperSprings Stabilizer Install on Top of Overload Spring of 2020 Ford F-350 Super Duty

Updated 12/16/2021 | Published 12/15/2021

Question:

I have a 2020 F-350 Dually which has a overload spring already from the factory, do I remove the factory spring and replace it with the super spring or does the super spring go on top of the factory overload spring ? Im interested in these to help level my truck with my truck camper on the truck. Thanks

asked by: Bill R

Expert Reply:

That's a good question, and you will keep the factory overload spring on your 2020 Ford F-350 Super Duty, as they are designed to fit directly over that spring. The correct SuperSprings kit for your '20 F-350, which will also work with your dually model, is the following:

- SuperSprings Custom Suspension Stabilizer and Sway Control Kit # SSA46

I added a cut out below of the instructions of the # SSA46 that have a photo showing part of the install which has the overload spring underneath the stabilizer.

Once installed on your F-350, the SuperSprings Stabilizer is going to do exactly what you are looking for - help level out your truck while also reducing side-to-side roll for better overall handling. The reason why is the weight of your camper that is normally on your factory leaf springs will instead get transferred to the SuperSprings, allowing your factory leaf springs to work normally instead of bearing the entire weight.

expert reply by: Kyle S