bing tracking image
Q & A Icon

4 on 4 Trailer Axle for a Custom Built Trailer to Pull Boat on a Beach


I would like to have a trailer made for pulling my boat up on beach. I am looking for a axle with hubs to accept atv wheel off of standard 4 bolt wheel. Do you sell these hubs on a axleb, thank you


Helpful Expert Reply:

The axles that we have are going to have a 4 on 4 bolt pattern like on the Dexter Trailer Axle with Idler Hubs - 4 on 4 Bolt Pattern # 20440I-ST-60. There is no "standard" ATV wheel so as long as the ATV wheel you want to use has the 4 on 4 pattern you will be good. With the # 20440I-ST-60 you would also need to get leaf springs, hangers and U-bolts.

I actually have a different route that I recommend going. I recommend using the Timbren Axle-Less Trailer Suspension System with Hubs - 4 on 4 # A20RS440. There are a few reasons I recommend going this route. The axle-less system is going to allow for a more custom application as it is universal and will work with any trailer. You also will not have to get leaf springs, hangers and U-bolts for the axle-less system and the axle-less system is going to be significantly better for off road conditions like driving on the beach.

helpful expert reply by:
Scott S

Products Referenced in This Question

Product Page this Question was Asked From

Q & A Icon

Similar Expert Q&A Pages

See More Q&A Expert Answers >>