Touchpad Control Panel For Kwikee Level Best Hydraulic RV Leveling System Not Functioning

Updated 06/10/2025 | Published 12/06/2021

Question:

Do i need new panel? Fuses appear good

asked by: Tom

Helpful Expert Reply:

Before you replace your unit try first, removing the screws holding your unit to your Winnebago. Then, remove the plug at the rear of the unit, wait 60 seconds, and plug back in. This will preform a reset on the unit and may solve your issue. This may have been caused if your battery has been fully discharged.

If this does not solve your issue, then yes, a Replacement Touchpad Control Panel for Kwikee Level Best Hydraulic RV Leveling System for Winnebago # LC77CJ is the solution. These units have been known to be fussy in some cases so this isn't an unusual situation.

expert reply by: Bryce D

Touchpad Control Panel for Kwikee Level Best Hydrualic RV Leveling System
(click to enlarge)

Control M.

4/21/2025

Great advice Bryce, thanks. Part LC77CJ does not offer the AUTO MODE option. My coach has that option. Are the two compatible? Of course I would lose the auto model option . . . W.

Bryce D.

4/21/2025

@ControlM Hey, actually if your control panel has an auto mode, then you'd want the Replacement Lippert Touchpad for Kwikee Level Best Hydraulic Leveling System # LC68UD instead, which has the auto mode.

Alan

6/10/2025

@BryceD this is only the front part of that actual touchpad.. what about all the electronics that this connects to? If you replace just this outside part will that actually fix the issue?