Is the Tommy Gate Lift Compatible with the Curt Hitch Receiver for a 2021 Chevy Silverado 2500

Question

Question:

Will your hitch fit on a 21 Chevrolet 2500 hd truck equip with a Tommy Lift

asked by: Mike

0

Expert Reply:

The G2 series of Tommy Gate Lifts for the 2021 Chevrolet Silverado 2500 is compatible with the Curt Trailer Hitch Receiver - Custom Fit - Class V Commercial Duty - 2-1/2" item # C96CR.

expert reply by: Jerred H

0

Answer 1

We only have the white version of what you mentioned with the part #DM99VR. The #DM69FR has mounting holes that are 5/8 inch.

view full answer...

Answer 2

The Demco Trailer Coupler #DM69FR was designed with simplicity in mind. You only need to place the coupler over the hitch ball and lower it; ball and coupler will automatically engage. There will not be any more play and the connection will be as…

view full answer...

Answer 3

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 6

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 7

Hi Eric, Thanks for your question. As long as you are able to remove the factory hitch from your 2025 GMC Sierra 2500, the #C96CR will work as a replacement. Of note, the #C96CR will more than likely mount up a bit differently than your factory…

view full answer...

Answer 8

Hey Matt, while we haven't had the chance to get a picture of the Curt hitch part #C96CR installed we have had chance with the 2 inch version of the hitch part #C35CR which I attached below. It's on a truck with a service body though so that…

view full answer...

Answer 9

Thanks for your patience. It took a few days to get the measurements for the Curt Trailer Hitch item #C96CR. I have linked a diagram I made below. The Curt item #C96CR is a class V hitch with a 2-1/2" receiver. It has a 20,000 lbs towing…

view full answer...

Answer 10

Yes, as long as you remove all of the OEM hardware and brackets the Curt Trailer Hitch Receiver #C96CR will fit your 2020 Chevy Silverado 3500 without any issues. This does install a little differently though as it secures to the bottom of the frame…

view full answer...

Answer 11

The Acme 91708 is a class 5 receiver hitch for a 2020-2021 Chevrolet/GMC Silverado/Sierra 2500/3500HD. I recommend the Curt Trailer Hitch Receiver #C96CR for a replacement. It is rated for a Gross Towing Weight of 20,000lbs and Tongue Weight of…

view full answer...

Answer 12

Hey Brandon, The Pacbrake Alpha Air Bags #PB42RV do not increase the total towing capacity of the vehicle. The capacity on these airbags refers to the load leveling capacity. The amount of support it will provide is up to 5,000lbs to help level out…

view full answer...

Is the Tommy Gate Lift Compatible with the Curt Hitch Receiver for a 2021 Chevy Silverado 2500

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching