86 Inch Axle With Hub and Electric Brakes For Enclosed Trailer

Updated 11/23/2021 | Published 11/22/2021

Products Featured in This Question

Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter

(648)

$11.96

Dexter Trailer Hub and Drum Assembly - 5,200-lb and 6,000-lb Axles - 6 on 5-1/2 - Pre Greased

(1092)

$307.32

etrailer Electric Trailer Brakes - Self-Adjusting - 12" - Left/Right Hand - 5.2K to 7K

(3173)

$193.37

Mounting Bolts and Hardware for 12" Brake Assemblies

(228)

$39.10

Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 6,000 lbs

(259)

$234.36

Trailer Axle Beam with Easy Grease Spindles - 86-1/2" Long - 5,200 lbs

(259)

$247.82

Question:

I have a late 1999 wells cargo 16’ enclosed dual axel Trailer I measured 86” out of drum to out of drum and spring perch at 69” center to center I would like Complete with brakes

asked by: Dave D

Expert Reply:

The closest we have to that is an 86-1/2 inch hub-face to hub-face axle with springs seats that are 71-1/2 inches center to center. So what you would need to do is get new springs seats and have them welded on the axle at the correct length.

You also need to make sure the axle is properly rated for your enclosed trailer; the two axle capacities we offer that are 86-1/2 inches long are 5,200 lb and 6,000 lb capacity. For the axles, spring seats, hubs, and brakes you can use the following:

- 5,200 lbs: Trailer Axle Beam with Easy Grease Spindles # e45GR
or
- 6,000 lbs: Trailer Axle Beam with Easy Grease Spindles # e33GR

- Spring Seat for Typical 5,200-lb to 7,200-lb, Round Trailer Axles with 3" Diameter # TRSS300

- Dexter Trailer Hub and Drum Assembly # 8-201-9UC3-EZ

- Electric Trailer Brake Kit # AKEBRK-7-SA with Mounting Hardware # BRKH12