Will the Brake Kit Item # AKUBRK-35-D Fit a Dexter 8-247 Hub?
Published 11/19/2021 >
Products Featured in This Question
Question:
Is the brake kit Item # AKUBRK-35-D correct for a Dexter hub 8-247?
asked by: Dave C
0
Expert Reply:
Yes, the etrailer Hydraulic Trailer Brake Kit - Uni-Servo - Dacromet - 10" - Left/Right Hand Assemblies item # AKUBRK-35-D are compatible with the Dexter Trailer Hub and Drum item # 8-247-50 you referenced. The brakes come with mounting bolts but not the hardware, if you need the nuts and lock washers you can use item # BRKH10B.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
etrailer Hydraulic Trailer Brakes - Uni-Servo - Dacromet - 10" - Left/Right - 3.5K
- Trailer Brakes
- Hydraulic Drum Brakes
- Marine Grade
- Manual Adjust
- Single Servo
- 10 x 2-1/4 Inch Drum
- 3500 lbs Axle
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Continue Researching
- Q&A: Replacement Hub & Drum For UFP HD-1377-10 & Hydraulic Brakes For Boat Trailer
- Article: How to Bleed Your Trailer Surge Brakes
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Availability Of 15" Trailer Wheel With 5 on 5.5" Bolt Pattern
- Q&A: Best Hydraulic Drum Brakes For A Boat Trailer With 3,500 Pound Axle
- Article: How To Measure And Replace Everything In Your Hub Assembly
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: Trailer Wiring Diagrams
- Q&A: New Brake Assemblies, Hub/Drums, Brake Lines, and Bearing Buddy for Trailer with 3,500 lb Axle
- Q&A: Parts Needed To Add Disc Brakes To A 2002 EZ Loader Trailer With No Brakes
- Article: Hydraulic Trailer Brakes: How They Work & What to Buy
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Trailer Lighting Requirements
- Article: What Size of Boat Trailer do I Need?

