Installation of 7-Way and 4-way Connector on 2005 Honda CRV
Updated 09/03/2009 | Published 09/02/2009
Products Featured in This Question
Question:
I need this part or something similar and everything else to connect to a 2005 CRV. Is wire included with this part or is their another or better choice?
asked by: Bob M
Expert Reply:
To install a 7-way connector on your 2005 Honda CRV you will need a T-One Wiring harness, item # 118336, for your vehicle and a 7 and 4 Way Installation Kit, item # ETBC7 which has all of the wiring and parts needed to wire the 7-way connector.
Once you have the 4-way harness installed you will need to install the 7-way connector and wire the extra circuits needed for the trailer you will be towing. If the trailer has brakes you will also need a brake controller. Any brand of brake controller will work but we recommend the Tekonsha Prodigy P2 proportional brake controller, item # 90885.
Featured Help Information
Miscellaneous Media
Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Trailer Wiring Diagrams
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between a Class II and a Class III Hitch?
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: How to Measure for Trailer Hitch Drop
- Q&A: 2025 Kia Sportage PHEV
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Q&A: Availability of Victron DC/DC Battery Charger With Lithium Compatibility and Engine On Detection
- Q&A: How to Add a 7-Way Connector to a 2015 Ford Transit T250
- Q&A: Parts Needed to Add 7-Way and 4-Way to 2023 Ford F-150