Which Adjustable Ball Mount That Can Be Used in Rise Or Drop Orientation for 2003 Ford F-250/F-350

Updated 09/20/2021 | Published 09/19/2021

Question:

Hello im looking to buy a adjustable hitch but i want to make sure im getting the right product i have measured my hitch from the receiver to the ground and i get 1 ft 7in i then measure from the coupler to the ground and get 1 ft 9in does that sound about right for a ford super duty truck and if so what do you recommend?

asked by: Weusi W

Expert Reply:

I'll start off by saying that it's a bit unusual that your Ford Super Duty truck receiver is lower than the trailer you're towing, so if those measurements are accurate then you'll need a ball mount with a 2 inch rise. If you're wanting an adjustable ball mount that can be used in a variety of rise or drop settings then I recommend using the B&W Tow & Stow 3-Ball Mount - 2" Hitch - 5" Drop, 5-1/2" Rise - 10K - Black # BWTS10048B. The B&W Tow & Stow will allow you to cover up to 5" of drop or 5-1/2" of rise, and comes with 3 hitch balls to allow you to tow a variety of different trailers. I really like that you can stow the hitch balls behind the ball mount and under the vehicle, so you won't have to worry about banging your knees when loading up the truck with it still installed.

I've linked a short review video of this adjustable ball mount, as well as our entire selection of adjustable ball mounts that fit in 2 inch receivers for you to check out in case you'd like to see what the other options are.

expert reply by: Erik B