Can Timbren Axle-Less Suspension System TASR7KS01 Be Installed On Gooseneck Dump Trailer?
Updated 09/09/2021 | Published 09/08/2021
Products Featured in This Question
Question:
I’m in need for a new 7k axel but am thinking of going with one of the axel less systems from the reviews. But I don’t see anything on a gooseneck dump trailer 16x7. So want to make sure they would work fo me. Aisle I’m know for over loading my trailer 14k trailer with 14k pay load when loading logs I fill the trailer full and want to make sure these axel less systems can handle over loads at times. One more thing seeing it’s a tandem axel would I need to replace both axels our could I do one at a time. Thank you
asked by: Ed
Expert Reply:
I would be happy to help!
The Timbren Axle-Less Suspension # TASR7KS01 you were looking at is universal so it can absolutely be installe on your 16' long x 7' wide gooseneck dump trailer. This system bolts directly to the frame of your trailer and replaces the leaf spring suspension with built in progressive rate AEON main springs that give a much smoother ride and do a better job of absorbing road shock.
You would need to replace both axles on your trailer at the same time as it is imperative that the suspension on your trailer is all the same to avoid any unsafe handling issues.
Since you have 7000lb axles already on your trailer you can reuse the hub and drums and brake assemblies as long as they are in good shape, or we have the new hub and drums # 42866UC3-EZ and brake assemblies # 23-180-181 if your current components are worn.
No axle, standard or axle-less suspension option, is rated to be overloaded, so since your trailer have a 14000lb GVWR and your axles have a 7000lb rating each you need to make sure you are staying at or under the rating of the lowest rated component.
I included videos of the products mentioned for you to take a look at.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 5 Bolt Flange - 7,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- 7000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: What is Max Air Pressure for Lionshead Steel Modular Trailer Wheel LH44ZR
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: How Many Pumps of Grease Should be Put in an Axle
- Q&A: How Close to Trailer Weight Should Capacity of Trailer Leaf Spring Be
- Q&A: Using 6000 lb Hubs on 7000 lb Axle
- Q&A: Can 6,000 Lb 6 on 5-1/2 Hubs Be Swapped Out for 7,000 Lb 8 on 6-1/2 Hubs
- Q&A: Longer U-Bolts for Installation of Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Article: How to Raise Your Travel Trailer Height
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Where to Position the Trailer Axle?
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Choose a Trailer Hitch Coupler
- Article: Double-Eye Trailer Suspension System Review
- Article: How to Winterize & De-Winterize Your RV (Simple Guide)