Which MORryde X-Factor Fits RV with Road Armor Equalizers

Question

Question:

Which x cross beams do I need for my 2401rg with road armour shackle upgrade and wet bolts

asked by: Lee D

0

Expert Reply:

We've checked with MORryde in the past and with the Road Armor equalizer setups they've told us that the # MR33WR will work.

expert reply by: Jameson C

0

Answer 1

Hey Bryan, thanks for reaching out. I can definitely help with that! There isn't a way to look up your camper to know exactly what leaf springs, shackles or equalizer you will need though, so I will need you to measure and confirm a few things…

view full answer...

Answer 2

Hey Rick, welcome back! If you have a stock suspension system, MORryde CRE, or SRE then you need the MORryde X-Factor Crossmember for Standard Frame Hangers #MR33WR. More than likely this is what you have on your Cougar 316RLS. If you have the…

view full answer...

Answer 3

Outstanding, thanks so much for the photos, they were really helpful. What it shows is that your 2022 Keystone Cougar 30BHS travel trailer does have stock suspension with a standard equalizer, and we do have the correct X-Factor Crossmember for you,…

view full answer...

Answer 4

Unfortunately, you cannot use the Correct Track #RR23QX on your 2020 Highland Mesa Ridge 5th wheel since you have the tapered spring hangers. While we do not have any kind of lift kit or correct track for your campers tapered hangers you could have…

view full answer...

Answer 5

According to my contact at MORryde, the MORryde X-Factor Crossmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR will work as long as they have the clearance to allow for the end plate to attach through the frame hanger and no obstructions…

view full answer...

Answer 6

Yes, the MORryde X-Factor Crosmember for CRE, SRE, or Stock Leaf Spring Suspension #MR33WR will work with the Road Armor Shock Absorbing Equalizer Kit #LC696740. I have also attached a review video for you to check out about the Lippert Road Armor.

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

Since the pin weight of your camper is 2.1k, I recommend going with the LoadLifter 5000 opposed to the 7500. While technically there is not reason you couldn't use the 7500 kit, it really is not necessary for a camper like yours. Generally the…

view full answer...

Answer 9

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 10

Hey Donny! For your Dometic Penguin/Brisk Air 15,000 BTU AC model B59516.711C0-MX, the correct soft start is the #DMC93JF. This is designed for Dometic Brisk II electronic air conditioner units with in-wall thermostats.

view full answer...

Which MORryde X-Factor Fits RV with Road Armor Equalizers

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching