Replacement Parts For A Titan Model 10 Master Cylinder and Dampers

Updated 09/03/2021 | Published 09/01/2021

Products Featured in This Question

Dexter Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs

(13)

$618.12

Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators

(74)

$156.74

Replacement Cylinder Cover for Dexter Model 10 and 20 Actuators

(34)

$5.27

Question:

I would like to replace the master cylinder on my welded T1607500. Do you know if the master cylinder will come out the front of the outer case ? Also, will the existing orifice connector fit the new cylinder or do I need a reducer. Would you please give me replacement part numbers for the master cylinder, dampers, and reducer/enlarger if needed for the T1607500. Thanks for your help,

asked by: Hardy B

Helpful Expert Reply:

Yes, you will be able to remove the master cylinder from the Titan Brake Actuator - Painted - Drum - 2-5/16" Ball - Weld On - 12,500 lbs, part # T1607500. This is a direct replacement, so you will not need a reducer. The master cylinder you need is for a drum brake actuator. It is the Replacement Master Cylinder and Push Rod Assembly for Drum Brakes - Model 10 and 20 Actuators, part # DX66FR. This replaces the master cylinder and pushrod in the Titan Model 10 Actuator. You will also need the Replacement Cylinder Cover for Titan Model 10 and 20 Actuators, part # T1507000.

I have included product descriptions and video demo links below.

expert reply by: Mark Smith