bing tracking image
Q & A Icon

Availability of Adapter for Dexter EOH Actuator for 2008 GMC Sierra 3500 Factory Brake Controller  

Updated 09/01/2021 | Published 08/31/2021

Question:

I know that most GM brake controllers will not work with electric over hydraulic brake systems. My truck is a 2008 GMC 3500 with the integrated controller and the brake system I’m installing is the Dexter 1000psi unit. I had a previous trailer with the Hydrastar system that I put the HBA-CAM on. My questions are: 1. Does the integrated system work with the Dexter system? 2. If not, is there something like the HBA-CAM for Dexter systems? 3. Would it be better just to install an aftermarket controller? If so which one would you recommend?

0

Expert Reply:

In order to use the factory brake controller on your 2008 GMC Sierra with the Dexter DX Series Electric Over Hydraulic Brake Actuator for Drum Brakes - 1,000 psi # K71-650 you will need an adapter. The good news is we have one available.

The Adapter Module for BrakeRite Electric Over Hydraulic Actuator - OE Ford, GM Brake Controllers # DX35FR is the part you are looking for. This will work just like the HBA-CAM you mentioned, and will allow you to control your Dexter Axle electric-over-hydraulic brake actuator with your factory GMC brake controller. The adpapter will intercept verification signals to prevent false error codes.

I would recommend using the adapter over buying a different brake controller. If you choose to go that route, you want to get a brake controller that is EOH compatible like the Tekonsha Prodigy P3 # 90195.

expert reply by:
0
Robin H

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>