How To Remove The Bug Screen On A Ventline E-Z Lift Ventadome Trailer Roof Vent

Question

Question:

Need to clean the screen and I am stumped...Thank you???? EZ Lift with large black handle on Heartland Mallard

asked by: Lori H

0

Expert Reply:

The bug screen # BVE0106-00 for your Ventline E-Z Lift Ventadome Trailer Roof Vent w/ 12V Fan # V3094-601-00 just snaps into place so you can remove it by pulling it down from its edges. I've attached a video where you can see it being installed for reference.

expert reply by: Kevin C

0

Answer 1

That is correct, the Replacement Printed Circuit Board for MaxxAir Powered Lift RV Roof Vents w/ Reversible Fan #MA10A21275K is the correct replacement for your MaxxFan Deluxe Roof Vent w/ 12v Fan, Thermostat, and Remote #MA00-07500K, and will work…

view full answer...

Answer 2

Yes, it has! The current MaxxFan roof vents like item #MA00-06401K can be used with lithium batteries. There was an issue with the older models of the MaxxFans but they went to a different circuit board that can handle the higher voltage for this…

view full answer...

Answer 3

If the Ventadome roof vent you have on your trailer has four mounting points then the replacement vent cover is part #BVE0108-03. This dome is designed to fit #V3092-601-00, #V3092-603-00, #V3094-601-00, #V3094-601-00C, #V3094-603-00, and…

view full answer...

Answer 4

You are right that the #MA00-06200K and the #MA00-07500K are very similar vent fans as far as most of the internal components. The main difference is that the 7500K uses a remote and has a powered lift. The 6200K is manual control and manual lift.…

view full answer...

Answer 5

Unless the MaxxFan Deluxe Roof Vent #MA00-06200K is installed on your vehicle I wouldn't worry about a voltage regulator because the voltage will drop enough that you won't see a spike over 13.6V. If you do have the roof vent installed on…

view full answer...

Answer 6

While we have heard of people using electrical vents like the MaxxFan Roof Vent w/ 12V Fan #MA00-07000K above a tub/shower, it is not meant to be installed in that location because water from the shower and steam can potentially affect the…

view full answer...

Answer 7

Hey Rob, thanks for reaching out! The MaxxAir Mini Manual RV Roof Vent #MA00-03851 sitting only 4-1/8" above your roof is going to give you the lowest profile option on the market that is still able to fully operate. Anything else that sits…

view full answer...

Answer 8

The CFM for the MaxxAir Mini Deluxe Trailer Roof Vent #MA00-03801 is 200. I reached out to my contact at MaxxAir who confirmed this for me.

view full answer...

Answer 9

There's no reason you couldn't use the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan #MA00-03851 as a bathroom fan. It's an exhaust fan that would do an excellent job in this application. If you'd rather use the larger in size…

view full answer...

Answer 10

Hey Kerry, thanks for reaching out about this! The newer boards in the MaxxFan Deluxe Roof Vent w/ 12V Fan #MA00-05301K (also part #MA10A21276K for only the circuit board) are compatible with the higher voltage you referenced. I've actually…

view full answer...

Answer 11

The MaxxAir Mini Deluxe Trailer Roof Vent part #MA00-03801 for white or part #MA00-03851 for black is a single speed fan yes. However, when the light is on the power to the fan is reduced so you will get sort of a low speed setting but it's not…

view full answer...

Answer 12

The only round ceiling vent we have is actually made to fit the standard vent hole that is square. It is the MaxxAir Mini Deluxe Trailer Roof Vent w/ 12V Fan in white #MA00-03801 or black #MA00-03851. We do not carry anything that is like the…

view full answer...

How To Remove The Bug Screen On A Ventline E-Z Lift Ventadome Trailer Roof Vent

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching