What is Pilot Diameter of Kenda 5.30-12 Trailer Wheel and Tire # AM30710
Updated 08/16/2021 | Published 08/15/2021
Question:
This package is exactly what Im looking for 12inch 4 bolt galv. wheels with 5.30B Kendas. However, my TurboLube hubs are big, and will only fit the wheels if the listed bore 2.84 is correct. Could someone take a caliper to one and make sure Im safe in ordering? Thanks,
asked by: Courtland S
Helpful Expert Reply:
We've measured the pilot diameter of the Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel # AM30710 and verified that it is 2.84 inches in diameter. Also, since some wheels are hub centric the manufacturers know that they have to get the dimension totally exact.
Product Page this Question was Asked From
Kenda 5.30-12 Bias Trailer Tire with 12" Galvanized Wheel - 4 on 4 - Load Range B
- Trailer Tires and Wheels
- Tire with Wheel
- Bias Ply Tire
- Load Range B
- 5.30-12
- 12 Inch
- K - 65 mph
- 4 on 4 Inch
- Steel Wheels - Galvanized
- Kenda
more information >
Continue Researching
- Q&A: Which is Better for Highway Use 4.80-12 or 5.30-12 Trailer TIres
- Article: Trailer Wiring Diagrams
- Q&A: Recommendation for Upgrading to Larger Tires from 5.30-12 Tires on Trailer
- Article: Trailer Tire Sizing
- Q&A: What is Best Trailer Tire in Size 5.30-12
- Q&A: Are ST145/R12 Tires And 4.80-12 Tires The Same Size?
- Q&A: Lug Nut Torque Chart for Trailer Wheels
- Q&A: Kenda 5.70-8 Bias Trailer Tire with 8 Galvanized Wheel Recommendation for Boat Trailer
- Q&A: Can a 5.30-12 Trailer Tire Replace a 4.80-12 Trailer Tire Using the Same Rim
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: How To Read A Tire Sidewall
- Article: How to Measure a Trailer Axle