Is the # SR25879 Pin 5/8"?

Question

Question:

Is the # SR25879 pin 5/8inch or 1/2?

asked by: Jake O

0

Expert Reply:

The diameter of the Replacement Hitch Bolt with Lock Washer for QuietRide Stainless Steel Ball Mounts # SR25879 is 5/8".

expert reply by: Bob C

0

Answer 1

There is a solution for you, but the HitchMate Threaded Lock #HE6001 will not work with your Kuat Transfer 2. You'd want the Cable Locks and Hitch Lock for Kuat Transfer 2 Bike Rack #PTSCLK12, which includes a hitch lock that attaches to your…

view full answer...

Answer 2

I compared the dimensions of the pin you provided, and we don't sell a lock housing individually that would work with it. Your best bet would be to buy a locking pin/lock housing combo like #HE6001. I've provided a diagram of the pin…

view full answer...

Answer 3

The difference is only in the design of these two complete roof racks. The price is exactly the same. The difference is in the mount and length of the bars, not the features of the bars themselves. The Rhino-Rack ROC25 has a flush mount with a…

view full answer...

Answer 4

Although it mounts to the sides of the front frame members instead of the tow hooks, the EcoHitch #EH59FR front mounted receiver would install so that the receiver tube sits behind the license plate holder. The Curt #C31018 and Draw-Tite #65049 would…

view full answer...

Answer 5

When installed, the EcoHitch #EH59FR front receiver will sit in the middle of the front bumper, between the tow hooks as shown in the photo I've provided for you. With the receiver sitting in the middle of the bumper, you won't need to worry…

view full answer...

Answer 6

Thanks for the picture! I have a solution for you but it does look like your dual steering stabilizer bars will be in the way for you to mount the Draw-Tite Front Hitch item #65049. Instead you will want to use the EcoHitch Hidden Front Mount Trailer…

view full answer...

Answer 7

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

There is only one difference between the Curt Trailer Hitch Receiver #C13176 and etrailer Trailer Hitch Receiver #e98909 that fit your 2020 Chevrolet Colorado, which is the finish. The Curt trailer hitch has a glossy black finish while the etrailer…

view full answer...

Answer 10

Yes, I have listed for your below the roof rack systems from Rhino-Rack, Thule, and Yakima that will fit the RetraxPRO XR Hard Tonneau Covers like part #RTT-80243 for your 2019 Ram 1500. Rhino-Rack Vortex Crossbar System part #RRVA180B-RRRLT600…

view full answer...

Answer 11

For a roof rack to be compatible on your 2020 Jeep Wrangler with Sky One-Touch Power Top, it can't be mounted on the top of the roof and it needs to be high enough for the folding roof to clear. What you need are tall gutter-mounted roof racks.…

view full answer...

Answer 12

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Is the # SR25879 Pin 5/8"?

Product Page this Question was Asked From

Continue Researching