Need a Roof Vent Cover For Fan-Tastic Fan
Updated 08/04/2021 | Published 08/03/2021
Products Featured in This Question
Question:
Hello there, I have a 2005 Renegade RV that has the Fan-tastic type vent /fan combos, these Camco vent covers are not tall enough for the vent to full open which is does when power is activated. The dimensions are 14x14 , but the clearance height is not sufficient.
asked by: Garrett S
Expert Reply:
I suggest the Fan-Tastic Vent Ultra Breeze Trailer Roof Vent Cover - 23" x 19.5" x 10.25", # FVU1500WH. This is designed to fit all Fan-Tastic Vent trailer roof vents. It is common for the vent lid to make some contact with covers however, the # FVU1500WH, will open most of the way and allow 100% of air flow produced by the fan. There is the option of the MaxxAir FanMate RV and Trailer Roof Vent Cover - 25" x 18-1/8" x 10-1/4", # MA00-955001 which is a little taller.
Product Page this Question was Asked From
Camco RV and Enclosed Trailer Roof Vent Cover w/ Detachable Louvered Screen - White
- RV Vents and Fans
- Vent Cover
- Roof Vent
- Plastic
- White
- Camco
more information >
Continue Researching
- Q&A: What is the Difference Between the MaxxAir and Camco RV Vent Covers
- Q&A: Replacement Metal Roof Lid for a VA530 RV Vent
- Q&A: How To Install Replacement Lid CAM40153 W/ 3 Point Hinge
- Q&A: Recommended Electric RV Awning Conversion Kit for a Dometic A&E 8500 Series Manual Awning
- Q&A: Which Vent Cover To Use with Ventline E-Z Lift Ventadome # V3092-601-00
- Q&A: Can Dylux Tankless RV Water Heater Be Used In Winter? Does It Have Freeze Protection?
- Q&A: Which Maxxair Roof Vent Cover is Designed to Fit the Ventline Ventadome RV Roof Vent
- Article: Trailer Hitch Installation Tips
- Article: Trailer Brakes Not Working? Troubleshooting Guide
- Article: Determining Trailer Tongue Weight
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)