How to Pick Out Thule Fairing for Roof Rack

Question

Question:

What size fairing should I be looking at for 60” load bars

asked by: Derek

0

Expert Reply:

To pick out a fairing you need to measure the distance between the feet of the roof rack and go with one that fits the best between them.

Below are the available sizes we offer that are for Thule bars and can fit other crossbars:
# TH62WV for a 32 inch fairing, # TH72WV for 38 inch fairing # TH82WV for a 44 inch fairing, # TH22WV for a 52 inch fairing.

expert reply by: Jameson C

0

Answer 1

Hey, Greg! Thanks for the great question. It’s a little tricky to recommend an exact size of Thule AirScreen XT for your 2021 Grand Cherokee because there are a few different roof rack setups and bar styles that can come on that vehicle. The best way…

view full answer...

Answer 2

The 44 inch fairing part #TH82WV would be the correct size for the 47 inch Wingbars part #TH711200. When picking out a fairing you want to do it based on the distance between the feet of the rack more than overall length of the bars.

view full answer...

Answer 3

In most cases, Volvo Roof Rack are made by Thule so your best option for fairing compatibility would be from Thule as well, the AirScreen XT for Thule Crossbars part #TH82WV for example but you'd need to measure the space between the mounting…

view full answer...

Answer 4

Hello Andrew, Well that sounds like quite the fun trip, what state or states will you be traveling through? You're asking a really important question, especially since you're planning a cross-country trip with about 250 pounds of bikes and…

view full answer...

Answer 5

Hey Kacey, I recommend going with the Rhino-Rack Fairing for Roof Racks #RRRF4. This fairing will clamp onto your crossbars, measures 50" long, and has rubber bumpers to prevent scratching your roof. How do you like your Volvo? I've heard…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 8

Hey Jonathon thank you so much for all of that additional information! To haul your bikes behind your class C Sprinter motorhome, while flat towing your Mini, I recommend the Hollywood Racks RV Rider Bike Rack item #HLY64FR and the Roadmaster Dual…

view full answer...

Answer 9

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

view full answer...

Answer 10

Hey Jeff. There is definitely a correlation between weight and capacity. I've listed the weight of all three of the Power Mountain Tallboy Off-Road Bottle Jacks we have below: Power Mountain Tallboy Off-Road Bottle Jack - 7-15/16" to…

view full answer...

Answer 11

Congrats on the new motorhome Edward! SnapPad doesn't have the 2026 Allego Red 38 KA in their system so I don't know what size your jack feet are. However, we have a few options that will work with the HWH leveling systems. What you'll…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

How to Pick Out Thule Fairing for Roof Rack

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching