How to Link AirLift WirelessONE System with WirelessONE App on Phone to Control via Bluetooth

Updated 07/08/2025 | Published 06/22/2021

Products Featured in This Question

Air Lift WirelessONE Compressor System for Air Helper Springs - Remote - Bluetooth - EZ Mount

(586)

$675.95

Question:

do I need the AL72704 remote if I have the WirelessONE app that uses bluetooth to control the compressor? I purchased my truck with the AL72704 system already installed, if they dont have the remote to give me, how do I get a new one or how do I identify the system thats on the truck?

asked by: Josh W

Expert Reply:

No. If you don't have a remote to an AirLift WirelessONE system # AL25980EZ you can control this with the WirelessONE app on your phone or you can replace the compressor or you can get the part number off the manifold of the system to determine the correct replacement remote control.

I've also linked the instructions for pairing an AirLink wireless system to this answer that show how to pair your WirelessONE app with your AirLift manifold.

expert reply by: Erik B

pairing instructions
(click to enlarge)

How T.

7/8/2025

I have a 2021 Ford F150 Lariat and bought the truck with the system installed already. how will I know which fuse to pull to connect the app?

Lazer S.

7/8/2025

@HowT It's the fuse going to the positive post on the battery. What you are basically doing is resetting the entire system so it goes into "pairing mode" and can then be added to other devices. The App will remember the compressor number/ID though so it won't need to be added again. If you literally mean "Where is the fuse?", it is typically in the engine compartment near the battery as it is the easiest place to install it. However, people do weird things sometimes and it could be mounted just about anywhere. Just follow the wire coming from the positive battery post going to the unit and you will find it.