Recommended Hanger Spacing for Triple-Axle Trailer Hanger Kit for 2" Slipper Springs
Updated 06/15/2021 | Published 06/11/2021 >
Question:
Hanger spacing with triple axle kit ap302 h302 with 6leaf springs 30 inches long
asked by: .Josep C
0
Expert Reply:
The proper positioning of leaf spring hangers will be up to the installer. Therefore, in order to get the correct leaf spring hanger positions for the Triple-Axle Trailer Hanger Kit for 2" Slipper Springs part # AP302-H302 you'll need to mock up the suspension and then weld the components as you see fit. I cannot provide exact locations for anyone spring and hanger combo unfortunately.
expert reply by:
Conner L
0
Product Page this Question was Asked From
Triple-Axle Trailer Hanger Kit for 2" Slipper Springs - 10-1/8" Long Equalizers
- Trailer Suspension Parts
- Hangers
- Suspension Kits
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- Slipper Springs - 2 Inch
- Triple Axle
- Redline
more information >
Continue Researching
- Q&A: Correct Hanger Spacing for Triple Axle Trailer with 26-1/2" Double Eye Springs
- Q&A: Hanger Spacing with Triple Axle Hanger Kit AP302-H302
- Q&A: Replacement 6-Leaf, 7,000LB Double Eye Spring For a 2012 Dutchman Voltage 3950 Toy Hauler
- Q&A: Dexter Suspension Upgrade Kit for Triple Axle Trailer with 33 Inch Spacing
- Q&A: Equalizer Upgrade For 7,000 lb Axles With 33 Inch Spacing on Trailer
- Q&A: Dimensions of Tandem-Axle Trailer Equalizer
- Q&A: Is There a Replacement Hub/Drum For Dexter 8-283?
- Article: Trailer Wiring Diagrams
- Article: Slipper Spring Trailer Suspension System Review
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs
- Article: 7 Common Questions Everyone Has About Trailer Tires
- Article: Where to Position the Trailer Axle?
- Article: My Trailer Hitch Doesn't Fit

