Does Pullrite 2700 5th Wheel Hitch Fit Curt No-Drill Bracket C16419?

Question

Question:

Will this work with Pullrite 2700 super slide hitch and rails

asked by: Frank D

0

Expert Reply:

Yes, the Pullrite 2700 fits industry standard rails so you could go with Curt Custom, No-Drill Fifth Wheel Bracket Kit for Dodge Ram # C16419 if you just need the brackets. Or for the complete kit you can go with Curt Custom Fifth Wheel Installation Kit for Dodge Ram 1500/2500 - Carbide Finish # C16419-204 which includes the brackets and the rails for your 2003 Dodge Ram 6-1/2' or 8' bed.

expert reply by: Andrew N

0

Answer 1

For your 2012 Dodge Ram with a 5-1/2 foot bed I recommend the B&W Patriot 5th Wheel Trailer Hitch - Dual Jaw - 16,000 lbs #BWRVK3200 along with the B&W Semi-Custom 5th Wheel Installation Kit for Dodge Ram #BWRVR3205-00. This is a fixed 5th…

view full answer...

Answer 2

I do have a solution for you, however the B&W Companion 5th Wheel Trailer Hitches like the Sliding #BWRVK3400-5W are not compatible with the Curt Gooseneck Hitch installed on your 2015 Chevrolet Silverado 2500. As you noted, the B&W uses a…

view full answer...

Answer 3

Your spray in bed liner would not be the issue in most cases but we do have a solution that we have found works in your situation. We had a customer come back and state that the first time he went to use the #16310 on his truck with a spray in bed…

view full answer...

Answer 4

Yes, the Pullrite Superglide 2700 will fit the industry standard Reese 5th Wheel Rail Adapter for Ram OEM 5th Wheel Towing Prep Package - 25,000 lbs item #RP30154.

view full answer...

Answer 5

The Curt X5 Fifth Wheel Adapter for B and W Square Shank Turnover Ball Hitches, #16310, is designed for use with B and W square shank turnover ball hitches. We spoke with Curt and they stated the Pullrite 5th wheel hitch is not compatible with the…

view full answer...

Answer 6

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

view full answer...

Answer 7

I spoke with my contact at CURT about the X5, #16310. He could not confirm a fit for the Pullrite Superglide 5th wheel hitch as they have not been tested together. However, he did provide me with the mounting tab spacing for you to compare to your…

view full answer...

Answer 8

I do have options for you but the Curt X5 5th Wheel Base Rails Adapter part #16310 for B&W Turnoverball, part #C16220 for Curt EZr, or part #C16210 for Curt Double Lock are not designed to work with auto-slide fifth-wheel hitches like your…

view full answer...

Answer 9

To install a fifth wheel hitch that would be compatible with your existing Curt gooseneck hitch, I'd recommend using Curt X-5 adapter, part #C16210. This adapter will lock into a Curt Double-Lock, Flip and Store gooseneck hitches (C-60 and C-600…

view full answer...

Answer 10

Curt X5 adapter, #16310, is designed to fit B and W Square Shank Turnover Ball Hitches. This adapter is compatible with a Reese slider 5th wheel trailer hitch. I have linked you to the install details for the adapter, as well as an FAQ article on…

view full answer...

Answer 11

The Curt X5 5th Wheel Base Rails Adapter #C16210 cannot be used with any automatic sliding fifth wheel hitches since those hitches attach to the pin box and rotate as the trailer turns. You'd need to use a manual slider like the Reese 20k Slider…

view full answer...

Answer 12

The Pullrite 2900 is designed for industry standard 5th wheel rails. That means that the adapter part #RP30154 would be all that you would need to install the hitch in the bed of your 2016 Ram 2500. This adapter fits the rail package of your truck…

view full answer...

Does Pullrite 2700 5th Wheel Hitch Fit Curt No-Drill Bracket C16419?

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Continue Researching