Craftsman Generator Amperage Adapters

Question

Question:

I just bought a Craftsman 3300i inverter generator and can not find the 25 amp twist lock adapter. Will the thirty amp three prong twist lock work for that?

asked by: RICHARD E

1

Helpful Expert Reply:

There is not a 25amp plug available anywhere. If you're looking for a 30amp twist lock to a 30amp regular plug you can use the Power Grip Generator Plug Adapter for RV Power Cord - 30 Amps - 3 Prong Twist Lock Item # CAM55333.

expert reply by: Kevin C

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

Thanks for the picture! I checked with Progressive Dynamics the replacement power converter you need for your Parallax Series 7300 Model 7345 is the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 45 Amp item #PD4645V.

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

I'd be more than happy to help you out! You're going to need a complete setup like what you find on an RV for what you're needing to do. This is based off of a battery bank but the power will be provided by the various methods you…

view full answer...

Answer 5

The Classic Accessories Tire Cover part #052963762204 that you referenced is designed to fit tires that are between 18 and 21 inches in diameter so it would work well on yours that are 20-1/2 inches in diameter. I attached a review video for you to…

view full answer...

Answer 6

The correct replacement for your Klauber K01431B300 slide-out motor is the Replacement Motor Assembly for Lippert RV Slide-Outs - Klauber A-300 Model #LC157511.

view full answer...

Answer 7

It's extremely likely that the taillight circuits on the trailer won't have enough power to run your ice chest and the taillights simultaneously, so you wouldn't want to power the cooler from your taillight circuits. However, if your…

view full answer...

Answer 8

We do not have this item in stock for me to measure its thread pitch but two of us estimated it as being 6 or 7 threads per inch. I linked a photo of the instructions to replace this part. The bearing is removable and is available as a replacement…

view full answer...

Answer 9

The replacement motor for your Lippert Venture VMC940RB would be the Replacement Motor for Stromberg Carlson Electric Landing Gear Set #LC196308. The Replacement Gearbox #LC276602 is correct too if you needed that as well.

view full answer...

Answer 10

It looks like you are using the Hott Rod RV Water Heater Conversion Kit #DGR6VP on your 6 gallon RV water heater. Since your connector is damaged you are going to need to replace the entire kit as they do not offer the connector for the heating…

view full answer...

Craftsman Generator Amperage Adapters

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching