What Size Drill Bit is Needed for TorkLift Stableload

Question

Question:

What diameter is the hole through the overload spring as my F350 does not have any? thanks

asked by: Aris

0

Expert Reply:

I spoke to TorkLift and the holes needed for the # TLA7310S will be 7/16". With leaf springs being a hardened steel, it is suggested that a harder drill bit is used. We do actually have # TLA7311S that would come with two 7/16" cobalt drill bits that would solve this issue.

expert reply by: Lazer S

0

Answer 1

For starters, if you are going to be using your 2016 Chevrolet Colorado LT for towing then the Timbren Suspension Enhancement System would be correct but if you going to be using your 2016 Chevrolet Colorado LT for off roading then I recommend using…

view full answer...

Answer 2

The 2016 Chevrolet Colorado does not have a plug-in adapter for a brake controller such as the Tekonsha Prodigy P3 Trailer Brake Controller part #90195. However, the wires that will need to be hardwired into the adapter are already present on the…

view full answer...

Answer 3

There is no mention in the instructions for the Magnaflow #MF19018, which I attached to this page for your convenience, that indicates that you would have to remove the spare. I have included a few snap shots from the directions that show a full…

view full answer...

Answer 4

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 5

Actually, the P3 now has the upgraded axis accelerometer like the P2. The Tekonsha P3 Trailer Brake Controller #90195, will work with both electric over hydraulic brakes on the trailer as well as electric brakes. It has a menu option on the display…

view full answer...

Answer 6

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 7

Hey Brandon, I would strongly recommend sticking with the Tekonsha RF brake controller part #TK94FR. We know this works really well and it sounds like it worked well for you too. The Curt Echo is not reliable enough for me to really ever recommend it…

view full answer...

Answer 8

If you just need a 4-pin to 7-pin trailer wiring adapter, then you can use part #C57672. This will plug into the 4-pin trailer connector on your brother's vehicle and give him the 7-pin socket for the trailer. Keep in mind, this will only give…

view full answer...

Answer 9

Hey Ron, congratulations on the new trailer! I have a Jay Feather myself and love it. You're definitely off to a great start with a weight distribution hitch, it will make a world of difference towing that trailer with your F-150. The Weigh Safe…

view full answer...

Answer 10

To install a Redarc Tow Pro Liberty in your 2023 Toyota Tacoma Sport you will need the following parts: Redarc Tow-Pro Liberty Brake Controller item #RED24FR Plug-and-Play Wiring Harness for Redarc Tow-Pro Trailer Brake Controllers item #RED99FR…

view full answer...

Answer 11

Hey Nelson, so you would need two separate systems since a supplemental braking system can only be used with a towed vehicle and a trailer brake controller can only control trailer brakes. Main difference is a supplemental braking system is designed…

view full answer...

Answer 12

We can definitely help install a brake controller and 7-way on your 2024 Toyota Grand Highlander but first the brake controller I recommend is the Redarc Tow Pro Liberty part #RED24FR with the install harness part #RED69FR. As this controller puts…

view full answer...

What Size Drill Bit is Needed for TorkLift Stableload

Products Featured in This Question

Product Page this Question was Asked From

Featured Help Information

Miscellaneous Media

Continue Researching