Recommended Trailer Hitch Receiver and Draw-Bar For 2011 Toyota Prius

Updated 04/28/2021 | Published 04/26/2021

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(475)

$165.46

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(149)

$61.02

2" Hitch Ball - 3/4" Diameter x 2-1/8" Long Shank - Stainless Steel - 3,500 lbs

(347)

$37.44

Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs

(2289)

$43.31

Curt Hitch Pin and Clip for 1-1/4" Hitches - 1/2" Diameter x 2" Span

(2955)

$3.51

Question:

Hello - I am interested in the Curt Class 1 Trailer Hitch Receiver Item # C11276. I also need a drawbar with a rise and 2inch ball. I also need the wiring kit for a 2011 Prius. Can you help me verify the right part numbers?

asked by: Peter M

Expert Reply:

I would be happy to help!

The Curt Trailer Hitch Receiver # C11276 is confirmed to fit your 2011 Toyota Prius and has a 200lb tongue weight rating and 2000lb trailer weight rating so you will need to make sure your trailer does not exceed those ratings.

For a drawbar Curt recommends the Curt Class II Drawbar - 2-5/8" Rise, 3-1/4" Drop - 7-1/4" Long - 3,500 lbs # C45521 which has a 2-3/4" rise. For a compatible 2" hitch ball you will need the # A-82, and for a hitch pin and clip you will need F-4.

To complete your towing setup you will also need a vehicle wiring harness # 118505.

I included videos for the products mentioned for you to take a look at.