Where Do Wires For Reverse Lockout Solenoid On Dexter DX7.5L DX29FR Get Connected?
Updated 04/27/2021 | Published 04/26/2021
Question:
I just purchased this item and there are two wires where my old unit only had one wire. There was not a wiring diagram in the box can you please let me know which wire goes where. blue and white wire Thanks
asked by: Dan D
Expert Reply:
The two wires on the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout - Bolt On - Disc - 2" Ball - Zinc - 7.5K # DX29FR you purchased are for the reverse lockout solenoid.
It does not matter which wire gets connected to what, but one wire will get grounded to the frame and the other wire gets connected to the trailer connector.
I included a video of the # DX29FR for you to take a look at.
Product Page this Question was Asked From
Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 4"
- Brake Actuator
- Surge Brake Actuator
- Boat Trailer
- Construction Trailer
- Farm Trailer
- Travel Trailer
- Utility Trailer
- Bolt-On
- 7500 lbs GTW
- 2 Inch Ball Coupler
- 3 Inch Channel Tongue
- Disc Brakes
- Electric Lockout
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Dexter Surge Brake Actuator - Disc - Elec Lockout - 2" Ball - Zinc - 7.5K - 3" x 4"
- Search Results: a60/a75/xr84
- Shop: Dexter Brake Actuator with Manual Lockout - Bolt On - Drum - 2" Ball - 7,500 lbs
- Video: A Closer Look at the DeeMaxx Stainless Steel Drive-In Grease Cap w/ Plug
- Video: The Low-Down on the Dexter DX7.5L A-60XL Brake Actuator w Electric Lockout
- Video: Detailed Breakdown of the Dexter Brake Actuator with Manual Lockout
- Shop: Dexter DX7.5L A-60XL Surge Brake Actuator - Drum - 2" Ball - Zinc - 7.5K
- Shop: Dexter DX7.5L A-60L Surge Brake Actuator with Fill Cap - Drum - 2" Ball - Primed - 7.5K
- Q&A: Correct Replacement Master Cylinder and Shock for a Dexter Model A60/A75/XR84 Brake Actuator
- Video: Review of the Replacement Shock Absorber Spring Kit for Dexter Brake Actuators
- Video: Feature Breakdown: Dexter DX7.5 Drop-N-Go Brake Actuator
- Shop: Dexter DX7.5 Drop-N-Go Brake Actuator - Disc Brakes - 2" Ball - Zinc Plated - 7,500 lbs
- Shop: Replacement DeeMaxx Disc Brake Caliper - Maxx Coating - 3,500 lbs to 6,000 lbs
- Q&A: Reverse Light PIn on a 7-Way Trailer Connector
- Search Results: brake actuator
- Shop: Replacement Trailer Wheel Bearing Kit, Bearings 15123/ 25580, Races 15245/25520 Races, 10-36 Seal
- Search Results: marine grade trailer brakes
- Q&A: Replacement Caliper Solution for Tie Down Engineering 46304
- Q&A: Difference Between Dexter DX7.5L A-60 Brake Actuators For Disc Brakes
- Q&A: Total Length Of The Dexter DX7.5L A-60 Brake Actuator DX29FR
- Q&A: Bolt Hole Dimensions of Dexter DX7.5L A-60 Actuator DX29FR
- Q&A: What Size and Grade Mounting Hardware for the Dexter DX7.5L A-60 Brake Actuator w Electric Lockout
- Video: Let’s Check Out the Replacement Master Cylinder Assembly for Dexter Model 6 Brake Actuators
- Video: Feature Breakdown: Replacement Master Cylinder Assembly for Dexter Brake Actuators
- Search Results: spindle wear sleeves
- Search Results: dexter 010~019~00
- Search Results: wear sleeve
- Search Results: spindle wear sleeve