Wiring Instructions and Diagram for the LED Amber Quad Flash Kit for Trucks and Trailers

Updated 08/18/2009 | Published 08/17/2009

Question:

Do you have a wiring diagram you could email me for your led warning light kit part #CPL65A-STR?? Plus what the warranty on the LEDs??

asked by: Craig

Expert Reply:

I pulled one of the units off the shelf in our warehouse and I have copied the directions that are included in the package for you. I called my contact at the manufacturer and the LEDs have a lifetime manufacturer warranty.

Instructions:
Your light kit includes 2 lights, 2 grommets and 2 plugs.
The first light is called a master (master is imprinted on back of light); the second light is called the slave (SLV is imprinted on back of light)

First, install the master light on one side of vehicle and wire the white wire to a ground.

Next, wire the red wire to your switched power source (12 volts).

Then, install the SLV (slave) light on the other side of the vehicle and wire the white wire to a ground.

Wire the red wire from the slave light to the black wire on the master light.

The black wire on slave is not used

I have posted a photo of these lights with wiring for you to view also.