Solution for Needing Replacement Solera Inner Arm # 383152

Question

Question:

can I order just the inner arm p/n 383152 its 48inch long. also the price

asked by: Hoyle S

1

Helpful Expert Reply:

I checked with Lippert and asked if we could get just the part number you mentioned and they told me it's not available by itself. You'd need the entire assembly part # LC281154.

expert reply by: Jameson C

1

Answer 1

Per Lippert, the inner arm 383152 is not available on its own, you must purchase the entire pitch arm which is the Solera 69" Standard Flat Awning Support Arm part #LC281154.

view full answer...

Answer 2

In order to get the correct replacement support arm for your Solera awning, what you want to do is measure the wall mount of your awning. All you need to do is measure the length of that mount, and that measurement will let you know which support arm…

view full answer...

Answer 3

When your current pitch arm is folded out and fully extended measure it's overall length. If it's 69 inch it would be the part #LC375994 for a replacement or if it's 63 inches #LC97UD.

view full answer...

Answer 4

The Replacement Support Arm Assembly for Lippert 63" Short Awning part #LC97UD does not come with the motor or any wiring, you'll need to transfer the motor and wiring from your old arms. These arms can indeed be used on both the drive and…

view full answer...

Answer 5

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 6

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 7

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 8

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 9

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 10

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 11

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

view full answer...

Answer 12

Hey Melanie. The reason you can't find a replacement for your GE ARC15AACBL2 15,000 btu air conditioner is because they phased them out. In 2025 all RV AC systems had to change over to a new coolant called R32. This was a EPA mandated decision.…

view full answer...

Solution for Needing Replacement Solera Inner Arm # 383152

Product Page this Question was Asked From

Continue Researching