Where Does Blue Wire On Curt 4-way To 5-way Adapter C57187 Get Connected?

Updated 04/02/2021 | Published 03/31/2021

Products Featured in This Question

Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat - Vehicle End

(104)

$18.18

Hook Probe Circuit Tester

(66)

$13.11

Question:

I have reviewed site and it seems all the easy stuff to understand is explained for some reason and the hard part is not? So I have 2013 Chrysler Town and Country with a 4 pole flat straight wiring system. I need to have a 5 pole flat straight adapter. Your conversion kit shows the fifth wire as blue, but I cant seem to see on a diagram or see video or have any explanation where I I have reviewed site and it seems all the easy stuff to understand is explained for some reason and the hard part is not. So I have 2013 Chrysler Town and Country with a 4 pole flat straight wiring system. I need to have a 5 pole flat straight adapter and it shows the fifth wire as blue, but I cant seem to see or see video or have any explanation where I go to hook up or splice in the fifth blue wire? How do I get this 5th wire hooked up on my minivan? Please help.

asked by: Jerre C

Expert Reply:

I would be happy to help!

The blue wire of the Curt Trailer Connector Adapter - 4-Way Flat to 5-Way Flat - Vehicle End # C57187 you were looking at needs to be connected to the reverse light wire on your 2013 Chrysler Town and Country.

The connector will plug directly into the existing 4-way connector you mentioned that you have, and will allow you to connect to a trailer with a 5-way flat connector.

I recommend using a circuit tester like the # PTW2993 to identify the correct reverse light wire.

I included a video of the # C57187 being installed on a different vehicle to give you an idea of what the installation will be like.