Replacement Awning Fabric For Fabric Which is Ripped

Updated 03/24/2021 | Published 03/22/2021

Products Featured in This Question

Solera Awning Rail Extrusion - Black - 8' Long

(25)

$152.53

Replacement 13'1" Fabric for 14' RV Awning - Universal - Solid Black

(1)

$238.20

Replacement 19'1" Fabric for 20' RV Awning - Universal - Sand Fade to White

(1)

$271.03

Question:

Dear Experts The awning fabric which attached to the rail extrusion had managed to pop out in which 30% is still attached. Upon viewing the fabric insert and noticing that all the once sewed seams have been ripped. What can be done to fix this issue. Is there an insert which can be wrapped around the fabric and then reed into the rail?? Regards

asked by: Capt. D

Expert Reply:

So the remedy here is going to be replacing your awning fabric, as there just isn't an insert or any type of product that will be able to fix the issue of the awning's fabric seams having been ripped. We do have fabric available for you to choose from, and it is compatible with Solera, Dometic A&E, and Carefree of Colorado awnings.

To choose the correct size of fabric, you will just need to measure your awning from the center of the awning's left arm to the center of the right arm, and choose the width based on that. We have fabric that ranges from 11 to 21 feet (arm to arm) and a variety of colors.

For example, if you measured from arm-to-arm and got 20 feet you could use the Solera 20' Replacement Awning Fabric - Sand Fade # LCV000334438; or if that measurement was 14 feet you could use the Solera 14' Replacement Awning Fabric - Solid Black # LCV000334377.

I have added a link below to a video review of the replacement fabric for you, as well as a link to our entire selection of replacement awning fabric so you can choose the size and color you need.

expert reply by: Kyle S