Recommended Hub/Drums Compatible With AKFBBRK-35-D 10-Inch Hydraulic Brake Assembly

Updated 03/19/2021 | Published 03/16/2021

Products Featured in This Question

Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10" - Left/Right Hand - 3,500 lbs

(365)

$192.45

Easy Grease Trailer Hub/Drum Assembly for 3.5K Axles - 10" Diameter - 5 on 4-1/2 - Galvanized

(738)

$175.47

Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Galvanized

(105)

$158.46

Question:

do you sell these marine grade Hydraulic Brake Kit - Uni-Servo - Free Backing - Dacromet - 10 - Left/Right Hand - 3,500 lbs in a kit with the drums, bearings, seals etc.

asked by: Walter C

Expert Reply:

We don't offer the # AKFBBRK-35-D brake assemblies kitted together with the brake drums, but I'd be happy to make some recommendations for you.

A 3500 lb axle typically uses a L68149 Inner and L44649 Outer bearing along with a 58846 grease seal with a 1.719 inner and a 2.565 outer diameter. If that's the case with your existing hubs, I'd recommend the
# AKHD-545-35-G-EZ-K for E-Z lube spindles or # AKHD-545-35-G-K for standard spindles. E-Z lube spindles have the zerk fitting on the end of the spindle for adding grease to the bearings. Both galvanized hub/drums are compatible with hydraulic drum brake assemblies.

Either hub/drum comes complete with the races already installed. Also included are the inner and outer wheel bearing, the grease seals the dust cap and lug nuts are included.

expert reply by: Mike L