bing tracking image
Customer Service My Orders
Q & A Icon

Hitch Extension Increasing Receiver Size from 1-1/4 to 2  

Updated 03/18/2021 | Published 03/15/2021

Question:

I need a 1 ¼” hitch extender to 2” adapter. The 1 ¼ shank needs to be longer than standard. The 2” receiver must clear the bumper.

0

Expert Reply:

If I understand your request, you are saying that your Sprinter has a hitch with a 1-1/4" square receiver, and you would like a part that plugs into the 1/4" receiver on one end and has a 2" receiver opening on the other end. In this case the Brophy # HTAD Hitch Adapter could be a solution. It offers a 7-1/4" extension of your hitch pin holes.

We also offer the Brophy # HES6 that offers a 5-3/4" extension and the Curt # D189 that has a 7" extension.

If you need an extra hitch pin for the 2" end you can use the Curt # C21500 hitch pin with clip. If you need an extra for the 1-1/4" end then the etrailer # e95TR set.

The other important thing to know is that the use of a hitch extender reduces the capacity of the hitch by 50%. If you have a Class-1 or Class-2 hitch this could be very limiting.

expert reply by:
0
Les D
Ask The Experts a Question >>

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>